35
Care and Cleaning
■
Titanium apatite deodorizing
fi
lter
1.
Open the front panel and
pull out the air
fi
lters.
Page 31
2.
Take off the Titanium
apatite deodorizing
fi
lter.
• Remove the
fi
lters from the tabs.
3.
Clean or replace the
Titanium apatite
deodorizing
fi
lter.
[Cleaning]
3-1 Vacuum dust, and soak in lukewarm
water or water for about 10 to
15 minutes if very dirty.
3-2 After washing, shake off remaining
water and let them dry in the shade.
• Do not wring out the
fi
lter to remove water from it.
[Replacement]
Remove the
fi
lter from the tabs
and prepare a new one.
• Dispose of the old
fi
lter as non-
fl
ammable waste.
4.
Insert the Titanium apatite
deodorizing
fi
lter as they
were.
• When attaching the
fi
lter, check that the
fi
lter is
properly set in the tabs.
5.
Reattach the
fi
lters.
Page 34
6.
Close the front panel
slowly.
Page 34
NOTE
• Operation with dirty
fi
lters:
−
cannot deodorize the air,
−
cannot clean the air,
−
results in poor heating or cooling,
−
may cause odor.
• Dispose of old
fi
lters as non-
fl
ammable waste.
• To order a Titanium apatite deodorizing
fi
lter, contact the dealer
where you bought the unit.
FTXTM30M2V1B
