14
■
To adjust the airflow rate setting
Press .
•
Each pressing of
advances the airflow rate setting in sequence.
Auto
Indoor unit quiet
Low
Middle low
Middle
Middle high
High
•
When the airflow is set to “ ”, indoor unit quiet operation will start and the noise
from the unit will become quieter.
•
In indoor unit quiet operation, the airflow rate is set to a weak level.
•
If the temperature does not reach the desired point, change the airflow rate setting.
•
In DRY mode, the airflow rate setting is not variable.
NOTE
■
Notes on the angles of the flaps
•
The flap swinging range depends on the operation. (See the figure.)
COOL and
DRY operation
FAN operation
HEAT operation
Upper limit
Lower limit
Stop operation
Stop operation
Upper limit
Lower limit
COMFORT
AIRFLOW
COMFORT AIRFLOW
35°
60°
95°
100°
40°
90°
Upper limit
Lower limit
Stop operation
40°
90°
•
In swing operation during cooling operation, the upper flap does not move. This is not malfunction.
When swing operation is stopped, the upper flap angle changes according to the lower flap angle.
■
Note on the angles of the flaps
•
Using 3-D airflow circulates cold air, which tends to collect at the bottom of the room, and hot air, which tends to collect near the ceiling,
throughout the room, preventing areas of cold and hot developing.
■
Note on airflow rate setting
•
At smaller airflow rates, the cooling (heating) effect is also smaller.
CAUTION
•
Always use a remote controller to adjust the angles of the flaps and louvers. If you attempt to move the flaps and louvers forcibly with hand
when they are swinging, the mechanism may be broken.
•
Always use a remote controller to adjust the louvers angles. Inside the air outlet, a fan is rotating at a high speed.
Содержание FTXS35K2V1B
Страница 43: ...42 ...
Страница 44: ......
Страница 45: ...Quick Reference Copyright 2014 Daikin 3P377621 4B 2014 08 ...