background image

18

OUTDOOR UNIT QUIET 

Operation

OUTDOOR UNIT QUIET operation lowers the noise level of the outdoor unit by 

changing the frequency and fan speed on the outdoor unit.  This function is 

convenient during the night.

To start OUTDOOR UNIT QUIET operation

 

„

Press 

 .

• 

” is displayed on the LCD.

To cancel OUTDOOR UNIT QUIET operation

 

„

Press 

 again.

• 

” disappears from the LCD.

[Example]

Using the OUTDOOR UNIT QUIET operation during the night.

The noise level of the outdoor unit will be lower.

• 

This is convenient when you need to consideration for your neighborhood.

NOTE

Notes on OUTDOOR UNIT QUIET operation

 

„

If using a multi system, the OUTDOOR UNIT QUIET operation will work only when this function is set on all operated indoor units. However, 

• 

if using priority room setting, refer to “Note for multi system”. 

 Page  28

This function is available in COOL, HEAT, and AUTO mode.

• 

This is not available in FAN and DRY mode.
POWERFUL operation and OUTDOOR UNIT QUIET operation cannot be used at the same time.

• 

Priority is given to the function of whichever button is pressed last.
Even the operation is stopped using the remote controller or the main unit ON/OFF switch when using OUTDOOR UNIT QUIET operation, 

• 

” will remain on the remote controller display.

OUTDOOR UNIT QUIET operation will drop neither the frequency nor fan speed if they have been already dropped low enough.

• 

01_EN_3P266959-1D.indd   18

01_EN_3P266959-1D.indd   18

11/20/2010   3:56:54 PM

11/20/2010   3:56:54 PM

Содержание FTXS20KVMN













































Отзывы: