Daikin FTXM-V Series, Руководство по обслуживанию

Страница: 82 / 172

ARC466A70 SiUS042113E
78 Part 5 Remote Controller
Reference
2. ARC466A70
Refer to the following pages for details.
Signal transmitter Display (LCD)
• Changes the temperature setting.
Auto Indoor unit quiet Low
Middle low
Middle Middle high High
ON/OFF button
• Press this button once to start
operation.
Press once again to stop it.
∗
STD : Indoor temperature at the time
when the Dry operation is
started.
TEMPERATURE
adjustment buttons
• Displays the current settings.
(In this illustration, each section is
shown with all its displays on for the
purpose of explanation.)
• To use the remote controller, aim the
transmitter at the indoor unit. If there is
anything blocking the signals between
the unit and the remote controller,
such as a curtain, the unit may not
operate.
• The maximum transmission distance
is about 23 ft (7 m).
FAN setting button
• When the airflow is set to “ ” ,
indoor unit quiet operation will
start and the noise from the unit
will become quieter.
• In indoor unit quiet operation,
operation sound becomes weak.
(The airflow rate also decreases.)
• In DRY operation, the airflow rate
setting is not available.
• Selects the airflow rate setting.
Receiver
POWERFUL 1 button and
Wireless LAN
2
button
(push 5 seconds)
• Starts POWERFUL operation.
• Wireless LAN connection.
< ARC466A70 >
: AUTO
: DRY
: COOL
: HEAT
: FAN Not available
64 ~ 86˚F
(18.0 ~ 30.0˚C)
64 ~ 90˚F
(18.0 ~ 32.0˚C)
STD ~ (STD–5˚F)
(STD~(STD−3.0°C))
50 ~ 86˚F
(10.0 ~ 30.0˚C)

1 POWERFUL Operation P.42

2 Wireless LAN Connection P.53