3.
Press
.
Result:
blinks.
4.
Press
or
to set the correct time.
5.
Press
.
Result:
Setting is complete. blinks.
3-4 Brightness of the indoor unit display
Adjust the brightness of the indoor unit display as desired, or
turn OFF the display.
3-4-1 To set the brightness of the indoor unit display
1.
Press
for at least 2 seconds.
Result:
The menu appears on the display. is blinking.
2.
Press
.
3.
Press
or
to change the setting as follows:
…is blinking
Brightness is…
High
Low
Off
4.
To confirm the selected setting, press
.
Result
: The brightness setting is changed.
Note:
The display automatically returns to the default screen
after 60 seconds. To return to the default screen sooner, press
twice.
3-5
To turn on the power supply
1.
Turn the circuit breaker on.
Result:
The flap of the indoor unit will open and close to set the
reference position.
3-6 To change indoor unit position setting
Set the indoor unit position to avoid direct airflow to walls.
1.
Press
for at least 2 seconds.
Result:
The menu appears on the display.
2.
Press
or
to change the menu to .
Result:
The menu appears on the display. blinks.
3.
Press
to select the menu.
Result:
blinks.
4.
Press
or
to change the setting as follows:
If the unit is...
Symbol
Blinks
Result
In the middle of the wall
(factory default setting)
≤500 mm from the wall
on right
≤500 mm from the wall
on left
Result:
The airflow range will be adjusted to avoid direct
contact with the wall.
4. Operation
4-1 Operation range
Use the system in the following temperature and humidity
ranges for safe and effective operation.
Operation mode
Operation range
Cooling
(a)(b)
•
Outdoor temperature: –10~46°C
•
Indoor temperature: 18~32°C
•
Indoor humidity: ≤80%
Heating
(a)
•
Outdoor temperature: –15~24°C
•
Indoor temperature: 10~30°C
Drying
(a)
•
Outdoor temperature: –10~46°C
•
Indoor temperature: 18~32°C
•
Indoor humidity: ≤80%
If operated outside the operation range:
(a) A safety device might stop the operation of the system.
(b) Condensation might occur on the indoor unit and drip.
6
01_EN_3P705032-1.indd 6
30/08/2022 10:19:51 am
