ESIE16-02K
|
Part 5. Appendix
5.1. Field setting
RA R32 Split & multi split M-Series
Page 96
31/05/21
|
Version 1.1
5.1.1.2. Brightness setting of multi-coloured lamp of the indoor unit
5.1.1.3. ON/OFF button on the indoor unit
1. Shortly press ON/OFF button indoor: auto, 25°C, auto fanspeed. To de-activate: shortly press ON/OFF again.
2. Press ON/OFF button indoor 5-9 seconds: forced operation mode = forced cooling. To de-activate: press again for 10 seconds.
5.1.1.4. Heat only mode
1. Please stop unit before setting.
2. How to switch H/O mode.
Remote controller: ARC466A33/ARC466A58
Figure 5-2: Heat only mode
1. Press TEMP and MODE buttons simultaneously.
2. SC is displayed on the screen.
3. Select L (light) with TEMP buttons up or down.
4. Press MODE button to enter brightness setting mode.
5. Press TEMP up or down to adjust brightness to L (low), H (high) or OFF.
6. Press MODE button again for 5 seconds to exit.
Temp
Temp
Temp
Mode
SC
Mode
Mode
0
1
Mode
Temp
Select
“SU”
Select “
19
”
Select
DISPLAY NORMAL
AFTER 60 s
Send signal to indoor unit
0: H/P (factory setting)
1: H/O
Display