![background image](http://html1.mh-extra.com/html/daikin/ftxf50a2v1b/ftxf50a2v1b_operation-manual_2459429004.webp)
3 About the system
Operation manual
4
FTXF50~7 FTXF50~71A2V1B
Daikin room air conditioner
3P511999-6J – 2021.07
WARNING
Be careful with ladders when working
in high places.
WARNING
Improper detergents or cleaning
procedure may cause damage on
plastic components or water leakage.
Splashed detergent on electric
components, such as motors, may
cause failure, smoke or ignition.
DANGER: RISK OF
ELECTROCUTION
Before cleaning, be sure to stop the
operation, turn the breaker OFF or pull
out the supply cord. Otherwise, an
electrical shock and injury may result.
WARNING
Stop operation and shut OFF the
power if anything unusual occurs
(burning smells etc.).
Leaving the unit running under such
circumstances may cause breakage,
electrical shock or fire. Contact your
dealer.
3
About the system
WARNING: MILDLY FLAMMABLE MATERIAL
The refrigerant inside this unit is mildly flammable.
NOTICE
Do NOT use the system for other purposes. In order to
avoid any quality deterioration, do NOT use the unit for
cooling precision instruments, food, plants, animals, or
works of art.
3.1
Indoor unit
CAUTION
Do NOT insert fingers, rods or other objects into the air
inlet or outlet. When the fan is rotating at high speed, it will
cause injury.
INFORMATION
The sound pressure level is less than 70 dBA.
WARNING
▪ Do NOT modify, disassemble, remove, reinstall or
repair the unit yourself as incorrect dismantling or
installation may cause an electrical shock or fire.
Contact your dealer.
▪ In case of accidental refrigerant leaks, make sure there
are no naked flames. The refrigerant itself is entirely
safe, non-toxic and mildly flammable, but it will
generate toxic gas when it accidentally leaks into a
room where combustible air from fan heaters, gas
cookers, etc. is present. Always have qualified service
personnel confirm that the point of leakage has been
repaired or corrected before resuming operation.
INFORMATION
The following figures are just examples and may NOT
completely match your system layout.
3.1.1
Indoor unit display
ON/OFF
a
b
c
d
a
Signal receiver
b
Operation lamp
c
Timer lamp
d
ON/OFF button
ON/OFF button
If the user interface is missing, you can use the ON/OFF button on
the indoor unit to start/stop operation. When operation is started
using this button, the following settings are used:
▪ Operation mode = Automatic
▪ Temperature setting = 25°C
▪ Airflow rate = Automatic
3.2
About the user interface
▪
Direct sunlight.
Do NOT expose the user interface to direct
sunlight.
▪
Dust.
Dust on the signal transmitter or receiver will reduce
sensitivity. Wipe off dust with a soft cloth.
▪
Fluorescent lights.
Signal communication might be disabled if
fluorescent lamps are in the room. In that case, contact your
installer.
▪
Other appliances.
If the user interface signals operate other
appliances, move the other appliances, or contact your installer.
▪
Curtains.
Make sure that the signal between the unit and the user
interface is NOT blocked by curtains or other objects.
NOTICE
▪ Do NOT drop the user interface.
▪ Do NOT let the user interface get wet.
Содержание FTXF50A2V1B
Страница 11: ......
Страница 12: ...3P511999 6J 2021 07 Copyright 2021 Daikin Verantwortung f r Energie und Umwelt...