Daikin FTXA202V1BS Скачать руководство пользователя страница 4 | Manualshive

Страница: 4 / 56

Daikin FTXA202V1BS Скачать руководство пользователя страница 4

1

|

About the documentation

Installer reference guide

4

FTXA25~50(A)(B)2V1B(W)(S)(T)(B)

Daikin room air conditioner

4P518023-3K – 2022.05

1 About the documentation

1.1 About this document

WARNING

Make sure installation, servicing, maintenance, repair and applied materials follow
the instructions from Daikin and, in addition, comply with applicable legislation and
are performed by qualified persons only. In Europe and areas where IEC standards
apply, EN/IEC 60335-2-40 is the applicable standard.

INFORMATION

Make sure that the user has the printed documentation and ask him/her to keep it
for future reference.

Target audience

Authorised installers

INFORMATION

This appliance is intended to be used by expert or trained users in shops, in light
industry, and on farms, or for commercial and household use by lay persons.

Documentation set

This document is part of a documentation set. The complete set consists of:

▪

General safety precautions:

-

Safety instructions that you MUST read before installing

-

Format: Paper (in the box of the indoor unit)

▪

Indoor unit installation manual:

-

Installation instructions

-

Format: Paper (in the box of the indoor unit)

▪

Installer reference guide:

-

Preparation of the installation, good practices, reference data,…

-

Format: Digital files on

https://www.daikin.eu

. Use the search function to

find your model.

Latest revisions of the supplied documentation may be available on the regional
Daikin website or via your dealer.

Scan the QR code below to find the full documentation set and more information
about your product on Daikin website.

The original documentation is written in English. All other languages are
translations.

Technical engineering data

▪

A

subset

of the latest technical data is available on the regional Daikin website

(publicly accessible).

«
...
2
3
4
5
6
...
»

Содержание FTXA202V1BS

























































Отзывы:

Нет отзывов