Care
30
English
Titanium apatite photocatalytic air-purifying filter
1.
Open the front panel and
pull out the air filters.
Page 28, 29
2.
Take off the titanium apatite
photocatalytic air-purifying
filters.
•
Hold the recessed parts of the frame and unhook
the 4 claws.
Claw
3.
Clean or replace the
titanium apatite
photocatalytic air-purifying
filters.
[Cleaning]
3-1 Vacuum dust, and soak in lukewarm
water or water for about 10 to 15
minutes if very dirty.
•
Do not remove the filter from the frame when
washing with water.
3-2 After washing, shake off remaining
water and let them dry in the shade.
•
Do not wring out the filter to remove water from it.
[Replacement]
Remove the filter from the filter
frame and attach a new one.
•
Do not throw away the filter frame. Reuse the filter
frame when replacing the titanium apatite
photocatalytic air-purifying filter.
•
When attaching the filter, check that the filter is
properly set in the tabs.
Tabs
•
Dispose of the old filter as non-flammable waste.
4.
Set the titanium apatite
photocatalytic air-purifying
filters as they were.
5.
Set the air filters as they
were.
Page 29
6.
Close the front panel slowly.
Page 28
NOTE
•
Operation with dirty filters:
– cannot deodorize the air,
– cannot clean the air,
– results in poor heating or cooling,
– may cause odor.
•
Dispose of old filters as non-flammable waste.
•
To order a titanium apatite photocatalytic air-purifying
filter, contact the dealer where you bought the air
conditioner.
Item
Titanium apatite photocatalytic
air-purifying filter (set of 3)
Part No.
KAF970A48 (without frame)
01_EN_3P686868-1.indd 30
2022/06/01 15:31:35