Daikin FTX25KMV1B Скачать руководство пользователя страница 25

Страница: 25 / 30

Troubleshooting

The outdoor unit emits water or
steam.



In HEAT operation

• The frost on the outdoor unit melts into water

or steam when the air conditioner is in
defrost operation.



In COOL or DRY operation

• Moisture in the air condenses into water on

the cool surface of outdoor unit piping and
drips.

The air conditioner does not
operate.
(OPERATION lamp is off.)

• Hasn’t a breaker turned off or a fuse blown?
• Isn’t it a power failure?
• Are batteries set in the remote controller?
• Is the timer setting correct?

Hot air does not

ow out soon

after the start of HEAT operation.

• The air conditioner is warming up.

You should wait for 1 to 4 minutes.
(The system is designed to start discharging
air only after it has reached a certain
temperature.)

Operation stopped suddenly.
(OPERATION lamp

ashes.)

• Are the air

lters clean?

Clean the air

lters.

• Is there anything to block the air inlet or the

outlet of the indoor and the outdoor units?

• Turn the breaker off and take all obstacles

away. Then turn it on again and try operating
the air conditioner with the remote controller.
If the lamp still

ashes, call the service shop

where you bought the air conditioner.

Operation stopped suddenly.
(OPERATION lamp is on.)

• For system protection, the air conditioner

may stop operating on a sudden large
voltage

uctuation. It automatically resumes

operation in about 3 minutes.

Mist comes out of the indoor unit.

• This happens when the air in the room is

cooled into mist by the cold air

ow during

COOL operation.

• This is because the air in the room is cooled

by the heat exchanger and becomes mist
during defrosting operation.

Содержание FTX25KMV1B






























Результаты поиска

Содержание FTX25KMV1B

Отзывы:

Daikin FTX25KMV1B, Руководство по эксплуатации, Страница: 25 / 30

Результаты поиска

Содержание FTX25KMV1B

Отзывы: