Basic Operation
14
English
You can adjust the airflow direction to increase your comfort.
CAUTION
•
Always use a remote controller to adjust the angles of the flap. Moving the flap forcibly by hand may cause a
malfunction.
•
Be careful when adjusting the louvers. Inside the air outlet, a fan is rotating at a high speed.
To start auto swing
Up and down airflow direction
Press
.
•
“ ” is displayed on the LCD.
•
The flap (horizontal blade) will begin to swing.
To set the flap at the desired position
•
This function is effective while the flap is in auto swing mode.
Press
when the flap reaches the desired
position.
•
“ ” disappears from the LCD.
To adjust the louvers at desired position
Hold the knobs and move the louvers (vertical blades).
09/12 class
15 class
Knobs
Knobs
Knobs
Knobs
NOTE
Notes on airflow direction setting
•
The movable range of the flap varies according to the operation mode.
•
If the airflow rate becomes weak during operation, the flap will stop.
When up and down airflow direction is set, the flap will stop in an upward position.
Movable range of the flap
COOL / DRY
HEAT
FAN ONLY
Adjusting the Airflow Direction
01_EN_3P686870-1.indd 14
2022/06/03 15:50:55