16
Basic Operation
Basic Operation
Tips for saving energy
Keeping the temperature setting at a moderate level helps save energy.
•
Recommended temperature setting for cooling: 26.0-28.0°C
Cover windows with a blind or a curtain.
• Blocking sunlight and air from outdoors increases the cooling effect.
Keep the air filters clean.
•
Clogged air filters cause inefficient operation and waste energy. Clean them once in about every 2 weeks.
Page 35
If you are not going to use the air conditioner for a long period, for example in spring or autumn, turn off the circuit
breaker.
•
The air conditioner always consumes a small amount of electricity even while it is not operating.
You can adjust the airflow rate to increase your comfort.
To adjust the airflow rate setting
Press
.
• Each pressing of
changes the airflow rate setting in sequence.
AUTO
Indoor unit quiet
Airflow rate 1-5 (Low to High)
•
When the airflow is set to “
”, quiet operation starts and noise from the indoor unit will
become quieter.
•
In the quiet operation mode, the airflow rate is set to a weak level.
•
If the temperature dose not reach the desired point, change the airflow rate setting.
•
If COOL/DRY operation is started with airflow settings on “AUTO”, the indoor unit will
initially deodorise, which functions to suppress any internal odours.
As a result, the indoor unit will not emit air immediately. (Wait for about 1 minute.)
•
At smaller airflow rates, the cooling effect is also smaller.
Adjusting the Airflow Rate
