Daikin FTKS20D2VMWL, Руководство по обслуживанию

Страница: 108 / 228

SiENBE04-507A Instruction
System Configuration 99
1. Open the front panel.
(page 98)
2. Pull out the air filters.
• Push a little upwards the tab at the center of
each air filter, then pull it down.
3. Take off the air Titanium Apatite Photocatalytic
Air-Purifying Filter.
• Hold the recessed parts of the frame and
unhook the four claws.
4. Clean or replace each filter.
See below.
5. Set the air filter and Titanium Apatite
Photocatalytic Air-Purifying Filter as they were
and close the front panel.
• Insert claws of the filters into slots of the front
panel.
Close the front panel slowly and push the panel
at the 3 points. (1 on each sides and 1 in the
middle.)
„
Air Filter
1. Wash the air filters with water or clean them with vacuum cleaner.
• If the dust does not come off easily, wash them with neutral
detergent thinned with lukewarm water, then dry them up in the
shade.
• It is recommended to clean the air filters every two weeks.
„
Titanium Apatite Photocatalytic Air-Purifying Filter
The Titanium Apatite Photocatalytic Air-Purifying Filter can be renewed by
washing it with water once every 6 months. We recommend replacing it
once every 3 years.
[Maintenance]
1. Remove dust with a vacuum cleaner and wash lightly with water.
2. If it is very dirty, soak it for 10 to 15 minutes in water mixed with a neutral cleaning agent.
3. Do not remove filter from frame when washing with water.
4. After washing, shake off remaining water and dry in the shade.
5. Since the material is made out of paper, do not wring out the filter when removing water
from it.
[Replacement]
1. Remove the tabs on the filter frame and replace with a new filter.
• Dispose of the old filter as flammable waste.
Filters
Air filter
Push
Titanium Apatite
Photocatalytic
Air-Purifying Filter
Filter frame
Tab
Tab