Operation
Adjusting the Airflow Direction
You can adjust the airflow direction to increase your comfort.
&CAUTION
• Always use a remote controller to adjust the angles of the flaps. Moving the flaps forcibly by
hand may cause a malfunction.
• Be careful when adjusting the louvres. Inside the air outlet, a fan is rotating at a high speed.
■ To start auto swing
Upper and lower airflow direction
1. Press(<:<tswiN� .
• " (� " is displayed on the LCD.
• The flap (horizontal blade) will begin to swing.
Right and left airflow direction
1. Press (�sw1NG] •
•"�"is displayed on the LCD.
• The louvres (vertical blades)
will begin to swing.
The 3-D airflow direction
1. Press (c4sw
1
N0 and (�sw1NG] •
•"�"and "�" are displayed on the LCD.
• The flap and louvres move in turn.
• To cancel 3-D airflow, press either
1,�sw
1
NaJ or
(�sw1NG]
again.
The flap or louvres will stop moving.
I\
II
\\
--��.
■ To set the flap or louvres at desired position
7
• This function is effective while flap or louvres are in auto swing mode.
1. Press
1,�swiNaJ
and (�swiNG] when the flap or louvres have
reached the desired position.
• In the 3-D airflow, the flap and louvres move in turn.
• "(:a.l" or"
e"
disappears from the LCD.
NOTE
■
Note on the angles of the flap
Using 3-D airflow circulates cold air, which tends to collect at the bottom of the room,
throughout the room, preventing areas of cold developing.