Daikin FTKF25XVMV, Руководство по эксплуатации

Страница: 19 / 68

OPERATION OPERATION
[Flow of function]
MOLD PROOF setting Stop
Automatic
start every time
To operate automaticall
y
To operate man
uall
y
Set function
during COOL
or DRY
Manual
start one time
Set function
during stop
The heat exchanger is
dried in fan only operation
for about 60 mins.
During this time, the flap
will open and air is emitted.
The heat exchanger is
cleaned in cooling operation
for about 60 mins.
During this time, the unit will
operate in cooling mode.
[Note]
During operation, cold air
blows out and the room
temperature may drop.
Automatic
stop
MOLD PROOF setting Stop
After
stop
Immediately
After
stop
MOLD PROOF operation
with streamer
MOLD PROOF operation with streamer
(The STREAMER
lamp blinks)
The heat exchanger is
dried in fan only operation
for about 60 mins.
During this time, the flap
will open and air is emitted.
(The STREAMER
lamp blinks)
Automatic
stop
NOTE
„
Notes on MOLD PROOF setting
• When you want to stop MOLD PROOF operation midway, press twice.
• This operation dries the inside of the air conditioner while streamer discharge is performed to
reduce the development of mold and odour inside the air conditioner. But the function does not
remove any adhered dust and mold.
• MOLD PROOF operation is not available when the unit is turned off using the OFF TIMER.
„
Notes on MOLD PROOF operation
• The flap may sometimes close to increase the drying effect inside the air conditioner.
• MOLD PROOF operation may not be performed if the COOL or DRY operation less than 5 minutes
(from turn on remote controller).
In some case you should wait for about 3 minutes more (see Troubleshooting
Page 26
for details.).
• If MOLD PROOF operation does not suit your preference, please stop operation.
Page 16
17
Tiếng V
iệt
English
01_EN_3P658678-11W.indd 17 03-Feb-23 4:45:05 PM