![background image](http://html1.mh-extra.com/html/daikin/ftke25bvma/ftke25bvma_operation-manual_501470018.webp)
17
■
What’s the HOME LEAVE operation
Is there a set temperature and air flow rate which is most comfortable, a set temperature and air flow rate which
you use the most? HOME LEAVE operation is a function that allows you to record your favorite set temperature
and air flow rate. You can start your favorite operation mode simply by pressing the HOME LEAVE button on the
remote control. This function is convenient in the following situations.
■
Useful in these cases.
1.Use as an energy-saving mode
Set the temperature 2-3°C higher (cooling) or lower (heating) than normal. Setting the fan strength to the lowest setting
allows the unit to be used in energy-saving mode. Also convenient for use while you are out or sleeping.
•
Every day before you leave the house...
•
Before bed...
2.Use as a favorite mode
Once you record the temperature and air flow rate settings you most often use, you can retrieve them by pressing
HOME LEAVE button. You do not have to go through troublesome remote control operations.
NOTE
When you go out, push the “HOME
LEAVE Operation” button, and the
air conditioner will adjust capacity to
reach the preset temperature for
HOME LEAVE Operation.
When you return, you will be
welcomed by a comfortably air
conditioned room.
Push the “HOME LEAVE Opera-
tion” button again, and the air con-
ditioner will adjust capacity to the
set temperature for normal opera-
tion.
Set the unit to HOME LEAVE Oper-
ation before leaving the living room
when going to bed.
The unit will maintain the tem-
perature in the room at a com-
fortable level while you sleep.
When you enter the living room
in the morning, the temperature
will be just right.
Disengaging HOME LEAVE
Operation will return the tem-
perature to that set for normal
operation. Even the coldest
winters will pose no problem!
• Once the temperature and air flow rate for HOME LEAVE operation are set, those settings will be used
whenever HOME LEAVE operation is used in the future. To change these settings, please refer to the
“Before using HOME LEAVE operation” section above.
• HOME LEAVE operation is only available in COOL and HEAT mode. Cannot be used in AUTO, DRY, and
FAN mode.
• HOME LEAVE operation runs in accordance with the previous operation mode(COOL or HEAT) before
using HOME LEAVE operation.
• HOME LEAVE operation and POWERFUL operation cannot be used at the same time.
Last button that was pressed has priority.
• The operation mode cannot be changed while HOME LEAVE operation is being used.
• When operation is shut off during HOME LEAVE operation, using the remote controller or the indoor unit
ON/OFF switch, “
”will remain on the remote controller display.
01_EN_3P098590-2L.fm Page 17 Thursday, July 28, 2005 4:55 PM