Si041417EA
Electrical Box
Removal Procedure
5
4. Electrical Box
Warning
Be sure to wait for 10 minutes or more after turning off all power supplies before
disassembling work.
Step
Procedure
Points
1. Disconnect the
connecting wire.
Service cover can be
removed without removing
the front grille.
1
Remove the screw, and
then the service cover.
2
3
Remove the screw, and
then the wire fixture.
Remove the 4 screws
of the terminal board
and disconnect the
connecting wire.
2. Remove the electrical
box.
When reassembling, be sure
to insert the earth/ground
wires in the front slit.
1
2
Remove the 2 screws
and detach the earth/
ground wires.
Release the earth/
ground wires from the
front slit at the top of the
electrical box.
Service cover
(R21011)
Terminal board
Connecting
wire
Wire fixture
(R21012)
Earth/ground wire (yellow/green)
Electrical
box
Front slit
Earth/ground
wire (green)
(R24254)
Front slit
Green
Yellow/green
(R24255)