Daikin FTHF40RVLT, Руководство по обслуживанию

Страница: 8 / 28

Electrical Box Si041652EB
6 Removal Procedure
5. Electrical Box
Warning
Š
Be sure to wait for 10 minutes or more after turning off all power supplies before
disassembling work.
Step Procedure Points
1. Disconnect the
connecting wire.
„
The service cover can be
removed without removing
the front grille.
„
The service cover has no
hook and may fall when the
screw is loosened. Be
careful not to drop the
service cover.
1 Remove the screw, and
then the service cover.
2
3
Remove the screw, and
then the wire fixture.
Remove the 4 screws
of the terminal strip and
disconnect the
connecting wire.
2. Remove the electrical
box.
„
When reassembling, make
sure to pass the green earth/
ground wire behind the heat
exchanger tube, except for
FTXF60QVMA. For
FTXF60QVMA, the green
earth/ground wire should
pass above the heat
exchanger tube.
1 Remove the 2 screws
and detach the earth/
ground wires.
Service cover
(R22894)
Connecting
wire
Wire fixture
Terminal strip
(R24136)
Earth/ground wire (green)
Earth/ground wire (green/yellow)
(R23516)
Earth/ground wire
(green/yellow)
Earth/ground
wire (green)
(R24088)