9
WIRING DIAGRAM
:FIELD WIRING
:TERMINAL
:CONNECTOR
,
:WIRE CLAMP
:PROTECTIVE EARTH (SCREW)
33H ............... FLOAT SWITCH
A1P ............... PRINTED CIRCUIT BOARD
C1R .............. CAPACITOR (FAN MOTOR)
CD ................ CURRENT DETECT CIRCUIT
F1U ............... FUSE (250V/5A)
HAP,HBP ...... LIGHT EMITTING DIODE (SERVICE MONITOR - GREEN)
M1A .............. MOTOR (SWING FLAP)
M2F .............. MOTOR (INDOOR FAN)
M3P .............. MOTOR (DRAIN PUMP)
PC ................. PHASE CONTROL CIRCUIT
Q1F ............... THERMO SWITCH (M2F EMBEDDED)
R1T ............... THERMISTOR (AIR)
R2T ............... THERMISTOR (COIL)
RC ................ SIGNAL RECEIVER CIRCUIT
RyC ............... MAGNETIC RELAY (OUTDOOR UNIT COMPRESSOR)
RyP ............... MAGNETIC RELAY (DRAIN PUMP)
SS1 ............... SELECTOR SWITCH (EMERGENCY)
T1R ............... TRANSFORMER (230V, 22V)
TC ................. SIGNAL TRANMISSION CIRCUIT
X1M,X2M ..... TERMINAL STRIP
WIRED REMOTE CONTROLLER
SS1 ............... SELECTOR SWITCH (MAIN/SUB)
RECEIVER/DISPLAY UNIT (ATTACHED TO WIRELESS REMOTE CONTROLLER)
A2P,A3P ....... PRINTED CIRCUIT BOARD
BS ................. ON/OFF BUTTON
H1P .............. LIGHT EMITTING DIODE (SERVICE MONITOR - RED)
H2P .............. LIGHT EMITTING DIODE (SERVICE MONITOR - GREEN)
H3P .............. LIGHT EMITTING DIODE (SERVICE MONITOR - RED)
H4P .............. LIGHT EMITTING DIODE (SERVICE MONITOR - ORANGE)
SS1 ............... SELECTOR SWITCH (MAIN/SUB)
SS2 ............... SELECTOR SWITCH (WIRELESS ADDRESS SET)
ADAPTER FOR WIRING
RyC,RyF ........ MAGNETIC RELAY
CONNECTOR FOR OPTIONAL PARTS
X30A ............. CONNECTOR (INTERFACE ADAPTOR FOR SKY AIR SERIES)
X33A ............. CONNECTOR (ADAPTOR FOR WIRING)
X35A ............. CONNECTOR (GROUP CONTROL ADAPTOR)
BLK
:BLACK
RED
:RED
WHT
:WHITE
YLW
:YELLOW
RECEIVER/DISPLAY UNIT
:
IN CASE OF SIMULTANEOUS OPERATION SYSTEM :
MASTER
:
SLAVE
:
REMOTE CONTROLLER
:
WIRED REMOTE CONTROLLER
:
ADAPTOR FOR WIRING
:
TERMINALS FOR OPERATION INDICATOR
:
FAN OPERATION
:
COMPRESSOR OPERATION
:
SWITCH BOX
:
NOTES
1. WHEN USING THE CENTRAL REMOTE CONTROLLER, SEE MANUAL FOR CONNECTION TO UNIT.
2. X24A IS CONNECTED WHEN THE WIRELESS REMOTE CONTROLLER KIT IS USED.
3. THE REMOTE CONTROLLER MODEL VARIES ACCORDING TO THE COMBINATION SYSTEM. SEE TECHNICAL MATERIALS AND CATALOGS, ETC.
BEFORE CONNECTING.
