Operation manual
8
FFQ25~60B7V1B
Split system air conditioners
4PW18600-1
Program timer operation
Operate in the following order.
■
The timer is operated in the following two ways.
■
Programming the stop time (
)
.... The system stops operating after the set time has elapsed.
■
Programming the start time (
)
.... The system starts operating after the set time has elapsed.
■
The timer can be programmed a maximum of 72 hours.
■
The start and the stop time can be simultaneously programmed.
1
TIMER MODE START/STOP
Press the TIMER MODE START/STOP button several times and
select the mode on the display.
The display flashes.
For setting the timer stop .... "
"
For setting the timer start .... "
"
2
PROGRAMMING TIME
Press the PROGRAMMING TIME button and set the time for
stopping or starting the system.
3
TIMER ON/OFF
Press the TIMER ON/OFF BUTTON.
The timer setting procedure ends.
The display "
or
" changes from flashing light to a
constant light.
When the timer is programmed to stop the system after 3 hours and
start the system after 4 hours, the system will stop after 3 hours and
then 1 hour later the system will start.
■
After the timer is programmed, the display shows the remaining
time.
■
Press the TIMER ON/OFF BUTTON once again to cancel
programming. The display vanishes.
N
OTES
When this button is pressed, the time advances
by 1 hour.
When this button is pressed, the time goes backward
by 1 hour.
NOTE
When setting the timer Off and On at the same time,
repeat the above procedure from
1
to
3
once again.
C
hr
H