Daikin FFQ09Q2VJUFFQ12Q2VJUFFQ15Q2VJUFFQ18Q2VJURX09QMVJURX12QMVJURX15QMVJURX18QMVJU, Руководство по обслуживанию

Страница: 85 / 146

SiUS091628EA Troubleshooting
Service Diagnosis 74
4.11 Low-voltage Detection or Over-voltage Detection
Error Code
U2
Method of Error
Detection Low-voltage detection:
An abnormal voltage drop is detected by the DC voltage detection circuit.
Over-voltage detection:
An abnormal voltage rise is detected by the over-voltage detection circuit.
Error Decision
Conditions Low-voltage detection:
„
The voltage detected by the DC voltage detection circuit is below 180 ~ 196 V (depending on
the model).
„
The compressor stops if the error occurs, and restarts automatically after 3-minute standby.
Over-voltage detection:
„
An over-voltage signal is fed from the over-voltage detection circuit to the microcomputer (over
458 ~ 500 V, depending on the model).
„
The compressor stops if the error occurs, and restarts automatically after 3-minute standby.
Supposed
Causes
„
Power supply voltage out of specification
„
Defective DC voltage detection circuit
„
Defective over-voltage detection circuit
„
Defective PAM control part
„
Disconnection of compressor harness
„
Short circuit inside the fan motor winding
„
Noise
„
Momentary drop of voltage
„
Momentary power failure
„
Defective outdoor unit PCB