8
Preparation Before Operation
■
To operate the remote
controller
•
To use the remote controller, aim the transmitter at
the indoor unit. If there is anything to block signals
between the unit and the remote controller, such
as a curtain, the unit will not operate.
•
Do not drop the remote controller. Do not get it wet.
•
The maximum distance for communication is
about 4m.
■
To fix the remote controller
holder on the wall
1. Choose a place from where the
signals reach the unit.
2. Fix the holder to a wall, a pillar, etc.
with the screws supplied with the
holder.
3. Place the remote controller in the
remote controller holder.
ATTENTION
■
About remote controller
•
Never expose the remote controller to direct sunlight.
•
Dust on the signal transmitter or receiver will reduce the sensitivity. Wipe off dust with soft cloth.
•
Signal communication may be disabled if an electronic-starter-type fluorescent lamp (such as
inverter-type lamps) is in the room. Consult the shop if that is the case.
•
If the remote controller signals happen to operate another appliance, move that appliance to
somewhere else, or consult the shop.
Receiver
Remote controller
holder
Set.
l
To remove, pull it upwards.
01_EN_3P141308-7H.fm Page 8 Friday, May 26, 2006 10:36 AM
Содержание FDXS25CVMA
Страница 5: ...4 Names of parts Indoor Unit 3 6 8 9 10 7 1 4 5 2...
Страница 26: ...0607 HT 3P141308 7H M06B022...