Procedure to Remove Horizontal Blade
Si281312E
4
Removal Procedure
3. Procedure to Remove Horizontal Blade
Procedure
Warning Be sure to wait for 10 minutes or more after turning off all power
supplies before disassembling work.
Step
Procedure
Points
Removing the decoration
panel according to
procedure for removing
the decoration panel.
1. Remove the inner frame
from the decoration panel
1
Unscrew the 4 screws
from the back of the
decoration panel.
2
Remove the 4 seal
parts (A) from the back
of the decoration panel.
3
Unscrew the 4 screws
from the front of the
decoration panel.
4
Pull out the inner frame
straight from the
decoration panel.
2. Remove parts related to
heat insulation
1
Remove heat insulation
from the 4 inner frames.
2
Remove heat insulation
from the 4 corners.
3
Remove a total of 8
bearing mounting
plates by unscrewing 1
screw, respectively.
Screw on the back side
(located in 4 places)
Seal part (A)
(located in 4 places)
Inner frame of
decoration panel
Screw on the front side
(located in 4 places)
Heat insulation of corner
(located in 4 places)
Bearing mounting plates
(located in 8 places)
Heat insulation of inner frame
(located in 4 places)
