Operation
Adjusting the Airflow Direction
You can adjust the airflow direction to increase your comfort.
&CAUTION
• Always use a remote controller to adjust the angles of the flaps. Moving the flaps forcibly by
hand may cause a malfunction.
• Be careful when adjusting the louvres. Inside the air outlet, a fan is rotating at a high speed.
Up and down airflow direction
■
To start auto swing
Press (<:'\lswi�.
• " (� " is displayed on the LCD.
• The flaps (horizontal blades) will begin to swing.
■
To set the flaps at desired position
• This function is effective while the flaps are in auto swing mode.
Press (<:'\lswiN� when the flaps reach the desired position.
• The flaps will stop moving.
• "(�" disappears from the LCD.
Right and left airflow direction
■
To adjust the louvres at desired position
7
Hold the knobs and move the louvres (vertical blades).
Knobs
• When the unit is installed in the corner of a room, the direction of the louvres should be
facing away from the wall.
If they face the wall, the wall will block off the wind, causing the cooling efficiency to drop.