Daikin ERLA03DAV3, Руководство по установке для специалистов, Страница: 97 / 192

9 | Configuration
Installer reference guide
97
ERLA EHFZ03S18DJ3V
Daikin Altherma 3 R F
4P596821-1A – 2020.05
Accessing settings – Legend for tables
You can access the installer settings using two different methods. However, NOT all
settings are accessible via both methods. If so, the corresponding table columns in
this chapter are set to N/A (not applicable).
Method Column in tables
Accessing settings via the breadcrumb in the menu
structure .
#
For example: [A.2.1.7]
Accessing settings via the code in the overview
settings .
Code
For example: [C-07]
See also:
▪ "To access the installer settings" [
4
97]
▪ "9.6 Menu structure: Overview installer settings" [ 4 138]
9.1.1 To change the user permission level
Default user permission level
The default user permission level is End user .
To set the user permission level to End user
1 Press for more than 4 seconds.
Result: Your user permission level is now End user . The user interface displays
the default home page.
To set the user permission level to Advanced end user
1 Go to the main menu or any of its submenus: .
2 Press for more than 4 seconds.
Result: Your user permission level is now Adv. end user . The user interface
displays additional information and a "+" is added to the menu title. The user
permission level stays in
Adv. end user until manually set otherwise.
To set the user permission level to Installer
Prerequisite: Your user permission level is Adv. end user .
1 Go to [6.4]: > Information > User permission level .
2 Press for more than 4 seconds.
Result: Your user permission level is now Installer . The home pages
display .
INFORMATION
The Installer permission level switches automatically back to End user in the
following cases:
▪
If you press again for more than 4 seconds, or
▪
If you do NOT press any button for more than 1 hour
9.1.2 To access the most used commands
To access the installer settings
1 Set the user permission level to Installer .