2
x
Product description
Installation instructions
8
EKSV21P/EKSV26P/EKSH26P
Solar panels on-roof installation
008.1618444_00 – 12/2012
2.2
Brief description
The Solar system is a thermal solar system for hot water generation and heating support.
The system consists of several, mainly pre-assembled, modules. Plug-in technology and a high degree of pre-assembly ensure fast
and simple system installation.
Unless specified otherwise, the components are not included in the scope of delivery and need to be ordered separately.
Electronic control
The fully-electronic Solar system R3 controller ensures optimum solar heat exploitation (hot water heating, heating support) and
compliance with all operational safety aspects. All parameters needed for trouble-free operation have been preset at factory.
2.3
System components for all systems
High performance flat solar panels
Solar panel mounting rails FIX-MP
The unpressurised system (drain back) must only be operated with the regulation and pump unit EKSRPS3,
the air-to-water heat pump EKHBRD*, the hot water storage tanks EKHWP* and the relevant components
(chapter 2.3 and 2.4).
The pressurised system must only be operated with the pump unit EKSR3PA, the pressure station
EKSRDS1A, the plate heat exchanger EKSRPWT1, with the heat pump EKHBH* or EKHBX*, the solar connection
kit EKSOL, the hot water storage tanks EKHWE/EKHWS and the relevant components (chapter 2.3 and 2.5).
EKSV21P
– H x W x T: 2000 x 1006 x 85 mm, weight: approx. 35 kg
EKSV26P
– H x W x T: 2000 x 1300 x 85 mm, weight: approx. 42 kg
EKSH26P
– H x W x T: 1300 x 2000 x 85 mm, weight: approx. 42 kg
Fig. 2-2
Flat solar panel
FIX-MP100
– for a EKSV21P flat solar panel
FIX-MP130
– for a EKSV26P flat solar panel
FIX-MP200
– for a EKSH26P flat solar panel
Consists of:
– 2x mounting profile rail
– 2x solar panel securing hooks
Fig. 2-3
FIX-MP
B
B
T
EKSV26P
EKSV21P
EKSH26P
H
H
