Daikin EKOMB22AAV1, Руководство по установке

Страница: 23 / 60

Daikin Europe NV 23
5.5 Flue gas output and air input
For the installation of the flue gas output and air input material, we
refer to the enclosed basic manual, or contact the manufacturer of
the appropriate flue gas output and air input equipment for
extensive technical information and specific assembly instructions.
Make sure that the spigot and socket joints of the flue gas
output and air input materials seal effectively and will not
come loose. Not properly attaching the flue gas output and the
air input can lead to dangerous situations or physical injury.
Check all parts which transport flue gas or air for air tightness.
5.5.1 Concentric connection 60/100
The boiler is fitted with a flue gas adapter suitable for connecting to
a concentric flue gas extractor system with a diameter of 60/100.
1.
Fit the concentric pipe for the air supply and burning gas extraction in the adapter.
The built-in gaskets ensure there is an air tight seal.
5.5.2 Concentric connection 80/125
If required, the flue gas adapter 60/100 can be replaced by a version
for a flue gas extractor system with a 80/125 diameter.
The conversion set for parallel connection can be ordered under EKHY090717.
1.
Carefully follow the instruction as provided with the adapter set 80/125.
2. Fit the concentric pipe for the air supply and burning gas extraction in the adapter.
The built-in gaskets ensure there is an air tight seal.
5.5.3 Parallel connection 80/80
If required, the flue gas adapter 60/100 can be replaced by a version
for a parallel flue gas extraction system (2 pipes) with a 80 mm diameter.
The conversion set for parallel connection can be ordered under EKHY090707.
1.
Carefully follow the instruction as provided with the adapter set 80.
2. Fit the pipes for the air supply and burn gas extraction in the input and output of
the unit. The built-in gaskets ensure there is an airtight seal.
5.5.4 Materials to be used:
Unit
category Materials Supplier/Test standard
C13 Feedthrough Daikin
Other parts Gastec QA or Daikin
C33 Feedthrough Daikin
Feedthrough at the Prefab chimney Gastec QA, Daikin or third
parties
Other parts In accordance to applicable
national or local legislation
C43 All materials Gastec QA or Daikin
At the CLV system Gastec QA
C53 Inlet roster Daikin
Other parts and exhaust hood Gastec QA or Daikin
C63 All materials and feedthrough Gastec QA
Main channel Gastec QA
Other parts Gastec QA or Daikin
C83 Inlet roster Daikin
C93 All materials Gastec QA or Daikin