Daikin DSG SERIES, Руководство по установке, Страница: 2 / 60

2
STARTUP, ADJUSTMENTS, AND CHECKS ............................14
AIR FLOW ADJUSTMENTS .....................................................15
MOTOR SHEAVE ADJUSTMENTS .........................................16
GAS SYSTEM CHECK.............................................................17
NORMAL SEQUENCE OF OPERATION ................................19
MAINTENANCE .......................................................................22
TROUBLESHOOTING .............................................................23
APPENDIX A BLOWER PERFORMANCE TABLES ................25
DIRECT DRIVE ..................................................................25
DSG036 DOWN SHOT AND HORIZONTAL ..................25
DSG048 DOWN SHOT AND HORIZONTAL ..................26
DSG060 DOWN SHOT ..................................................27
DSG060 HORIZONTAL ..................................................28
BELT DRIVE .......................................................................29
HIGH STATIC DOWN SHOT ..........................................30
STANDARD HORIZONTAL ............................................31
HIGH STATIC HORIZONTAL .........................................32
APPENDIX B ELECTRICAL DATA ...........................................34
APPENDIX C UNIT DIMENSIONS ...........................................35
APPENDIX D WIRING DIAGRMS........................................... 36
START-UP CHECKLIST ...........................................................58
REPLACEMENT PARTS
O
rdering
P
arts
When reporting shortages or damages, or ordering repair
parts, give the complete unit model and serial numbers
as stamped on the unit’s nameplate.
Replacement parts for this appliance are available
through your contractor or local distributor. For the loca-
tion of your nearest distributor, consult the white business
pages, the yellow page section of the local telephone
book or contact:
HOMEOWNER SUPPORT
DAIKIN NORTH AMERICA LLC
19001 KERMIER ROAD, WALLER, TX 77484
855-770-5678
SAFETY INSTRUCTIONS
t
O
t
he
i
nstaller
Before installing this unit, please read this manual to
familiarize yourself on the specific items which must be
adhered to, including maximum external static pressure
to unit, air temperature rise, minimum or maximum CFM
and motor speed connections.
Keep this literature in a safe place for future reference.
I
F THE INFORMATION IN THESE INSTRUCTIONS IS NOT FOLLOWED
EXACTLY
,
A FIRE OR EXPLOSION MAY RESULT CAUSING PROPERTY
DAMAGE
,
PERSONAL INJURY OR LOSS OF LIFE
.
- D
O NOT STORE OR USE GASOLINE OR OTHER FLAMMABLE VAPORS
AND LIQUIDS IN THE VICINITY OF THIS OR ANY OTHER APPLIANCE
.
- WHAT TO DO IF YOU SMELL GAS:
* D
O NOT TRY TO LIGHT ANY APPLIANCE
.
* D
O NOT TOUCH ANY ELECTRICAL SWITCH
;
DO NOT USE
ANY PHONE IN YOUR BUILDING
.
* I
MMEDIATELY CALL YOUR GAS SUPPLIER FROM A
NEIGHBORS PHONE
. F
OLLOW THE GAS SUPPLIERS
INSTRUCTIONS
.
* I
F YOU CANNOT REACH YOUR GAS SUPPLIER
,
CALL THE
FIRE DEPARTMENT
.
- I
NSTALLATION AND SERVICE MUST BE PERFORMED BY A QUALIFIED
INSTALLER
,
SERVICE AGENCY OR THE GAS SUPPLIER
WARNING
D
O NOT CONNECT TO OR USE ANY DEVICE THAT IS NOT DESIGN
CERTIFIED BY THE MANUFACTURER FOR USE WITH THIS UNIT
.
S
ERIOUS PROPERTY DAMAGE
,
PERSONAL INJURY
,
REDUCED UNIT
PERFORMANCE AND
/OR
HAZARDOUS CONDITIONS MAY RESULT
FROM THE USE OF SUCH NON
-
APPROVED DEVICES
.
WARNING
S
HEET METAL PARTS
,
SCREWS
,
CLIPS AND SIMILAR ITEMS INHERENTLY
HAVE SHARP EDGES
,
AND IT IS NECESSARY THAT THE INSTALLER AND
SERVICE PERSONNEL EXERCISE CAUTION
.
CAUTION
Failure to follow the safety warnings exactly could result in
serious injury, death or property damage.
Never test for gas leaks with an open flame.
Use a commercially available soap solution made specifically
for the detection of leaks to check all connections. A fire or
explosion may result causing property damage, personal injury
or loss of life.
WARNING
FIRE OR EXPLOSION HAZARD
AVERTISSEMENT
RISQUE D’INCENDIE OU D’EXPLOSION
Si les consignes de sécurité ne sont pas suivies à la lettre, cela
peut entraîner la mort, de graves blessures ou des dommages
matériels.
Ne jamais vérifier la présence de fuites de gaz au moyen d’une
flamme nue. Vérifier tous les raccords en utilisant une solution
savonneuse commerciale conçue spécialement pour la détection
de fuites. Un incendie ou une explosion risque de se produire,
ce qui peut entraîner la mort, des blessures ou des dommages
matériels.