background image

1

HORIZONTAL PROP POWER 

EXHAUST FOR 3-12.5 TON UNITS 

DBC, DBG, DBH, DRC, DRG, & DRH MODELS 

KIT INSTRUCTIONS

©  2020 

19001 Kermier Rd., Waller, TX 77484

www.daikincomfort.com

 

 

 

P/N: IOD-7116B 

Date: June 2020

Only personnel that have been trained to install, adjust, 

service or repair(hereinafter, “service”) the equipment 

specified in this manual should service the equipment.  

The manufacturer will not be responsible for any injury 

or property damage arising from improper service or 

service procedures.  If you service this unit, you assume 

responsibility for any injury or property damage which 

may result.  In addition, in jurisdictions that require one 

or more licenses to service the equipment specified in 

this manual, only licensed personnel should servise the 

equipment. 

Improper installation, adjustment, servicing or repair of 

the equipment specified in this manual, or attempting to 

install, adjust, service or repair the equipment specified in 

this manual without proper training may result in product 

damage, property damage, personal injury or death.

WARNING

WARNING

PROP 65 WARNING 

FOR CALIFORNIA CONSUMERS

Cancer and Reproductive Harm -

www.P65Warnings.ca.gov

0140M00517-A

ATTENTION INSTALLING PERSONNEL

As a professional installer, you have an obligation to know 

the product better than the customer. This includes all 

safety precautions and related items.

Prior to actual installation, thoroughly familiarize yourself 

with this Instruction Manual. Pay special attention to all 

safety warnings. Often during installation or repair, it is 

possible to place yourself in a position which is more 

hazardous than when the unit is in operation.

Remember, it is your responsibility to install the product 

safely and to know it well enough to be able to instruct a 

customer in its safe use.

Safety is a matter of common sense...a matter of thinking 

before acting. Most dealers have a list of specific good 

safety practices...follow them.

The precautions listed in this Installation Manual are 

intended as supplemental to existing practices. However, 

if there is a direct conflict between existing practices and 

the content of this manual, the precautions listed here take 

precedence.

DESCRIPTION

The horizontal prop power exhaust kits are used in 

conjunction with the model numbers listed at the top of 

this installation instruction. These kits are not applicable to 

vertical applications. See Table 1 for package usage.

The power exhaust kit includes (1 or 2) 300mm EBM prop-

type fan(s), mounted in power exhaust housing. Wiring 

harnesses are provided to connect the power exhaust to 

the economizer for low voltage, and to the unit single point 

connection for high voltage.

The power exhaust housing is constructed of pre-painted 

steel to match color of rooftop unit. For 7½-12½ Ton 

applications, the power exhaust replaces the barometric 

relief hood on the field supplied return air duct, and mounts 
near the economizer.

PART NUMBER

TONS

VOLTAGE

Height

Width 

Depth

208/230V

1&3 Phase

460V

3 Phase

208/230V

1&3 Phase

460V

3 Phase

0270L01137

7½ to 12½

18.38

36.5

17

0270L01138

0270L01170

3 to 6

20

21.25

17

0270L01171

Table 1- Part Number Package Usage and 

Dimensions

WARNING

ELECTRICAL SHOCK HAZARD 

Failure to follow this warning could cause personal injury 

and/or death. 

Before beginning modification, be certain that the main-line 

electrical disconnect switch is in the off position. Close the 

main gas supply shutoff valve. Tag disconnect switch and gas 

valve with suitable warning labels. 

IMPORTANT: Follow all applicable local 

electrical codes and NEC (National Electrical 

Code), when installing these kits.

Содержание DBC









Отзывы: