Daikin Daikin Altherma 3 H F+W, Руководство пользователя

Страница: 30 / 60

4 | Operation
User reference guide
30
EABH/X16DF6V(7)+9W(7) + EAVH/X16S(U)18+23DA6V(7)+9W(7)
Daikin Altherma 3 H F+W
4P556071-1C – 2021.09
In menu… You can read out…
[8.3] Dealer information Contact/helpdesk number
[8.4] Sensors Room, tank or domestic hot water,
outside, and leaving water temperature
(if applicable)
[8.5] Actuators Status/mode of each actuator
Example: Domestic hot water pump
ON/OFF
[8.6] Operation modes Current operation mode
Example: Defrost/oil return mode
[8.7] About Version information about the system
[8.8] Connection status Information about the connection
status of the unit, the room thermostat
and the LAN adapter.
4.6.4 To configure time and date
1 Go to [7.2] User settings > Time/date .
4.7 Preset values and schedules
4.7.1 Using preset values
About preset values
For some settings in the system, you can define preset values. You only need to set
these values one time, then reuse the values in other screens such as the
scheduling screen. If you later want to change the value, you only have to do it in
one place.
Possible preset values
You can set the following user-defined preset values:
Preset value Where used
Tank temperatures
under [5]
Tank
Restriction: Only
applicable if a
DHW tank is
present.
[5.2] Comfort
setpoint
You can use these preset values in [5.5]
Schedule (weekly schedule screen for
the DHW tank) if the DHW tank mode is
one of the following:
▪ Schedule only
▪ Sc reheat
[5.3]
Eco
setpoint
[5.4] Reheat
setpoint
The software uses this preset value if
the DHW tank mode is
Sc reheat .