Page
5
of
1
5
DAFU-IOM—01
For basic unit specification
,
kindly refer to the data on the nameplate affixed outside the unit like the represented figure above which
will provide
the
following unit specifications
:
1) Manufacturer’s name and address
2) Size and serial number of the unit
3) Date of manufacture
4) Nominal Air flow
5) Main supply voltage
6) Frequency
7) Number of phases
8) Motor Power & FLA
Further information
,
relative to both construction and performance
,
is
given in the specific product catalogue and technical features
,
which is part of this manual.
USE OF THE UNIT
DAIKIN AIR FILTRATION UNIT
is
used to remove impurities in air in Residential, Commercial, and Industrial environments.
INSTALLATION
The user/ installer is responsible for ensuring that the unit is installed
to guarantee
the static and dynamic stability of the same. All works must
be carried out in compliance with national legislation on safety in the workplace.
The user
or
installer must ensure that atmospheric conditions cannot prejudice the safety of persons or property during installation
or
use.
Daikin shall accept no liability whatsoever in the following cases:
Incorrect installation or installation not carried out according to the procedures, partial or total failure to comply with the
instructions
Incorrect electricity / hydraulic / compressed air supply
Incorrect use of the unit
Lack of maintenance
Unauthorised modifications or repairs
Use of non-original or unsuitable spare parts
QUALIFICATION REQUIRED FOR THE USE AND MAINTENANCE OF THE UNIT
GENERAL OPERATOR
Authorised
to operate the unit
through
the
s
peed controller and
s
witches on the unit.
He/she may only switch the unit on and off and carry out command operations.
B
e fully acquainted with danger and warning signals.
F
ully understand the functioning cycle of the unit, and therefore have carried out theoretical- practical training, operating under
the direct guidance of an expert operator or user of the unit, or under the direct guidance of one of the manufacturer’s technicians.
MAINTENANCE MECHANIC
Authorised
to carry out maintenance, regulation, replacement, and repair operations on mechanical
parts
.
He/she
m
ust be a skilled mechanic and able to carry out mechanical maintenance in a satisfactory and safe manner.
Not authorised
to carry out any operations on the electrical system.
MANUFACTURER’S TECHNICIAN
Authorised
to carry out complex operations in any situation.
He/she works in accordance with the user.
MAINTENANE ELECTRICIAN
Authorised
to carry out electrical operations for regulation, maintenance, and repairs.
Authorised
to work when voltage is present inside electrical panels and derivation boxes.
He/she must be a skilled electronic/electrical technician, therefore able to carry out.
E
lectrical/electronic maintenance in a satisfactory and safe manner, with theoretical preparation and proven experience.
Not authorised
to carry out mechanical operations.
