22
ON/OFF TIMER Operation
Timer functions are useful for automatically switching the air conditioner on or off
in the morning or at night. You can also use the ON TIMER and OFF TIMER
together.
To use ON TIMER with a 24 hour clock display
(24 HOUR ON/OFF TIMER)
• Check that the clock is correct.
If not, set the clock to the present time.
Page 10
• To set the ON TIMER in an hours remaining display.
Page 24
1.
Press
.
“
” is displayed on the LCD.
“ ” blinks.
• “ ” and day of the week disappear from the LCD.
2.
Press until the time setting reaches the point
you like.
•
Each pressing of either button increases or decreases the time setting by 10 minutes.
Holding down either button changes the setting rapidly.
3.
Press
again.
• “ ” and setting time are displayed on the LCD.
•
The multi-monitor lamp blinks twice.
The TIMER lamp periodically lights orange.
Page 5
Display
To cancel ON TIMER operation
Press
.
• “ ” and setting time disappear from the LCD.
• “ ” and day of the week are displayed on the LCD.
NOTE
Notes on TIMER operation
• When TIMER is set, the present time is not displayed.
• When using the ON/OFF TIMER to start/stop operation, the actual operation start/stop time may differ from the time set. (Maximum of about 10
minutes)
In the following cases, set the timer again.
• After the circuit breaker has turned off.
• After a power failure.
• After replacing the batteries in the remote controller.
01_EN_3P472684-1.indd 22
6/13/2017 9:01:39 AM
Содержание CTKJ25RVMAS
Страница 43: ...Memo 42 ...