5
|
Operation
User reference guide
20
FTXTP-M_FTXTP-N
Daikin room air conditioners
4P728152-3 – 2023.03
INFORMATION
If the unit reaches the temperature setpoint:
▪
in cooling or automatic mode. Fan will stop operating.
▪
in heating mode. Fan will operate in low airflow rate.
5.4.1 To adjust the airflow rate
1
Press
to change the airflow setting as follows:
5.5 Airflow direction
When.
Adjust the airflow direction as desired.
What.
The system directs the airflow differently, depending on the user selection
(swinging or fixed position). It does so by moving horizontal blades (flaps) or
vertical blades (louvers).
Setting
Airflow direction
Vertical automatic swing
Moves up and down.
Horizontal automatic
swing
Moves from side to side.
+
3-D airflow direction
Moves alternately up and down and from side
to side
[—]
Stays in a fixed position.
CAUTION
ALWAYS use the wireless remote control or other user interface (if applicable) to
adjust the position of the flaps and louvers. When the flaps and louvers are swinging
and you move them forcibly by hand, the mechanism will break.
The movable range of the flap varies according to the operation mode. The flap will
stop at the upper position when the airflow rate is changed to low during the up
and down swing setting.
a
b
c
a
Flap range in cooling or drying operation
b
Flap range in heating operation
c
Flap range in fan only operation