background image

Installation manual 

BYCQ14 BYCQ140 BYCQ140E2GFW1B

 

Self cleaning decoration panel

 

4P558847-1B 2019.02

3

4.  Preparations for panel

Note

• Perform all the required work in "4. Preparations for panel" on 

page 3 with the panel kept in the packing material (on the 

bottom side).

• Do not put the panel downward or upright or leave the panel on 

protruding parts. 

Otherwise, scratch damage to the surface of the panel may 

result.

• 

Do not touch the swing flap and do not put any force on the 

swing flap. This will result in malfunction of the unit.

4-1  Removal of suction grille from panel, 

protective corrugated cardboard, and set of 

accessories

(1) 

Press the knobs of the suction grille and lift up the knobs.

Decoration panel

Knobs

Packing material 

(bottom)

Suction grille

(2) 

Open the suction grille to an angle of approximately 45° and 

remove the suction grille from the panel.

45°

(3) 

Take out the protective corrugated cardboard. 

Take out the protective corrugated cardboard (on top of the 

panel) together with the accessories attached to the backside 

of the protective corrugated cardboard.

Protective corrugated 

cardboard (top) 
(The accessories are 

on the backside.)

Protective corrugated 

cardboard (bottom)

Note

Do not impose force on the swing flap, brush unit, or air filter 

when handling the panel.

Panel

Brush unit

Air filter

Swing flap

4-2  Removal of decoration corner covers

Panel

Decoration corner cover

Decoration corner cover

Decoration 

corner cover

Decoration corner 

cover (with display)

(1) 

Raise and remove the decoration corner cover (with the 

display) in the direction of the arrow.

Note

Do not impose force on the lead wires.

Operation/filter cleaning

(2) 

Remove the screws on the backside of the decoration corner 

cover (with the display), open the cover, and remove the 

connector attached to the front end of the lead wires from the 

PCB.

Cover

Connector

Lead wires

PCB

3

1

Screw

2

Decoration corner cover 

(with display)

(3) 

Remove each of the remaining decoration corner covers (i.e., 

three covers) in the direction of the arrow.

Panel

Decoration corner cover

4-3  Removal of dust box

Fixing knob 

of dust box 

and clasp

Dust box

Fixing knob of dust box

Содержание BYCQ140EGFB

















Отзывы: