18
5)
Check the operation status of the remote
controller by checking if the green lamp on
the ON/OFF button lights up or not.
• If the remote controller is ON (Green
lamp lights up), continue to step
6)
.
• If the remote controller is OFF (Green
lamp doesn’t light up), press the ON/
OFF button within 10 seconds after
“
” is displayed on the basic
screen.
6)
Check the operation of the buttons by
pressing the following buttons
• Press the Airflow Direction
Adjustment button (
) for setting
airflow.
•
Press the Mode Selector button
(
) for setting operation mode.
•
Press the Fan Speed Control button
( ) for setting fan speed.
7)
Press and hold 3 buttons --the Mode
Selector button (
), the Airflow
Direction Adjustment button (
),
and the Temperature Setting (up) button
(
).
The basic screen returns and normal
operation is conducted.
Note:
Test operation will automatically finish in
30 minutes.
8)
Check the functions according to
“
10. Basic operation
”.
9)
When the decoration panel is not
installed, turn off the power after the test
operation finishes.
5)
7)
[Basic screen]
• If the interior finish work is not completed when the test operation is finished, for protection of the air
conditioner ask the customer not to operate the air conditioner until the interior finish work is
completed.
If the air conditioner is operated, the inside of the indoor units may be polluted by substances
generated from the coating and adhesives used for the interior finish work and cause water splash
and leakage.
CAUTION
01_EN_4P543053-1C.indd 18
10-May-19 4:13:25 PM
