3 Remote controller: Overview
Installation and operation manual
4
BS
Madoka wired remote controller
4P596265-1 – 2019.11
For the user
3
Remote controller: Overview
3.1
About the controller
Depending on configuration, the controller is operable in either one
of three modes. Each mode offers different controller functionality.
Mode
Functionality
Normal
The controller is fully functional.
All functionality described under
The controller can be a master or
a slave controller.
Alarm only
The controller only acts as leak
detection alarm (for a single
indoor unit).
No functionality described under
For information on the leak
detection alarm, see
The controller can be a master or
a slave controller.
Supervisor
The controller only acts as leak
detection alarm (for the whole
system, i.e. multiple indoor units
and their respective controllers).
No functionality described under
For information on the leak
detection alarm, see
The controller can only be a
slave controller.
INFORMATION
For more information about the modes and how they affect
the controller, see the installer and user reference guide.
3.2
Buttons
+
-
c
b d
a
a
ON/OFF
▪ When OFF, press to turn ON the system.
▪ When ON, press to turn OFF the system.
b
ENTER/ACTIVATE /SET
▪ From the home screen, enter the main menu.
▪ From the main menu, enter one of the submenus.
▪ From their respective submenu, activate an operation/
ventilation mode.
▪ In one of the submenus, confirm a setting.
c
CYCLE/ADJUST
▪ Cycle left.
▪ Adjust a setting (default: decrease).
d
CYCLE/ADJUST
▪ Cycle right.
▪ Adjust a setting (default: increase).
3.3
Status icons
Icon
Description
System operation ON.
Indicates that the system is in
operation.
System operation OFF.
Indicates that the system is
NOT in operation.
Bluetooth
.
(1)
Indicates that the controller is
communicating with a mobile device, for use with the
Madoka Assistant app.
Lock.
Indicates that a function or operation mode is
locked and therefore cannot be used or selected.
Centralised control.
Indicates that the system is
controlled by central control equipment (optional
accessory) and that control of the system by the
controller is limited.
Changeover under centralised control.
Indicates
that the cooling/heating changeover is under
centralised control by another indoor unit, or by an
optional cool/ heat selector that is connected to the
outdoor unit.
Defrost/Hot start.
Indicates that the defrost/hot start
mode is active.
(1)
The Bluetooth® word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and use of such marks by Daikin Europe
N.V. is under license. Other trademarks and trade names are those of their respective owners.