Daikin BRC1H519K7, Инструкция для установки и пользователя

Страница: 13 / 52

9 Installation
Installer and user reference guide
13
BRK+S7
Wired remote controller
4P513689-1D – 2019.05
INFORMATION
P1 and P2 have no polarity.
9.3.2 To connect the electrical wiring
Connect controller terminals P1/P2 to indoor unit terminals P1/P2.
From the top
P1P2
From the rear
P1P2
From the left
P1P2
From the bottom
P1P2
9.4 Closing the controller
9.4.1 Precautions when closing the controller
CAUTION
Never touch the internal parts of the controller.
CAUTION
When closing the controller, be careful not to pinch the
wiring.
NOTICE
To prevent damage, make sure the front of the controller is
clicked into the rear casing securely.
9.4.2 To close the controller
1 Click the front of the controller into the rear casing.
1
2
2 When the installation site is dust‑free, peel off the protective
seal.
9.5 Opening the controller
9.5.1 Precautions when opening the controller
NOTICE
The controller PCB is mounted into the front casing. When
opening the controller, be careful not to damage the PCB.
NOTICE
When the front and rear casing are separated, make sure
the PCB does not come into contact with dust or moisture.
9.5.2 To open the controller
1 Insert a flat‑head screwdriver into one of the bottom closing
mechanisms and slowly twist it.