SiK011003
36
Operation Manual
Operation Manual
2.1.1.1 ON/OFF button
Press this button can turn on or turn off the air conditioner. After turning on the unit, operation indicator "
Medium fan
Low fan
High fan
Medium-low fan
Medium-high fan
ATUO
AUTO
COOL
DRY
FAN
HEAT
" on indoor unit is ON (green
indicator. Color may be different for different models)and indoor unit gives out a sound.
2.1.1.2 MODE button
Press this button can select your required operation mode.
2.1.1.4 FAN button
Press this button you can select the fan speed in sequence: auto (AUTO), low speed (
), medium speed (
), high speed (
).
2.1.1.3 "+" or "-" button
● Each pressing of the "+" or "-" button can increase or decrease the set temperature by 1°C. Hold the "+" or "-" button for at least 2s and
the set temperature on the remote controller will change quickly. After reaching to the required time, release the button.
● Under TIMER ON, TIMER OFF or Clock setting, you can press the "+"or "-" button to adjust time. (Refer to TIMER button for details)
2.1.1.5 SWING button
Press this button to start up or turn off auto swing function. When auto swing function is started up, " " will be shown on remote controller.
Horizontal louver of air conditioner will swing up&down automatically at the maximum angle. Press this button again to exit auto swing
function.
2.1.1.6 SAVE button
Under cooling mode, press "SAVE" button to start up or turn off SAVE function. When SAVE function is started up, "SE" will be shown
on remote controller, and air conditioner will adjust the set temperature automatically according to ex-factory setting to reach to the best
energy-saving effect. Press "SAVE" button again to exit SAVE function. ( This function is applicable to partial of models.)
Note:
● Under energy-saving function, fan speed is defaulted at auto speed and it can’t be adjusted.
● Under energy-saving function, set temperature can’t be adjusted. Press "TURBO" button and the remote controller won’t send signal.
● Sleep function and energy-saving function can’t operate at the same time. If energy-saving function has been set under cooling mode,
press sleep button will cancel energy-saving function. If sleep function has been set under cooling mode, start up the energy-saving
function will cancel sleep function.
Note:
● Under auto speed, air conditioner will adjust the fan speed (high, medium or low speed) according to ambient temperature.
● Low speed under dry mode.
● After selecting auto mode, air conditioner will operate automatically according to ambient temperature. Set temperature can’t be adjusted
and also can’t be displayed. Press "FAN" button can adjust fan speed. Press "SWING" button can turn on or turn off auto swing.
● After selecting cool mode, air conditioner operates under cool mode. Cool indicator " " on indoor unit is ON. You can press "+" or "-"
button to adjust set temperature. Press "FAN" button can adjust fan speed. Press "SWING" button can turn on or turn off auto swing.
● After selecting dry mode, air conditioner operates under dry mode at low speed. Under dry mode, fan speed can’t be adjusted. Press
"SWING" button can turn on or turn off auto swing.
● After selecting fan mode, air conditioner operates only under fan mode. Press "FAN" button can adjust fan speed. Press "SWING" button
can turn on or turn off auto swing.
● After selecting heat mode, air conditioner operates under heat mode. Heat indicator " " on indoor unit is ON. You can press "+" or "-"
button to adjust set temperature. Press "FAN" button to adjust fan speed. Press "SWING" button can turn on or turn off auto swing. (Cooling
only unit can’t receive the signal for heating mode.)
Note:
For preventing cold wind, after starting up heating mode, indoor fan will blow fan afterdelaying 1-5min. (Details time is decided by indoor
ambient temperature) Temperature setting range on remote controller: 16
o
C-30
o
C. Fan speed setting range: auto, low speed, medium speed
and high speed.
AUTO
COOL
FAN
DRY
HEAT
2.1.1.7 X-FAN button
After pressing this button under cooling or dry mode, remote controller displays the character of "X-FAN" and X-FAN function is started up.
Press this button again to cancel X-FAN function. The character of "X-FAN" will disappear.