Daikin Altherma M EDLQ011-016CW1, Руководство по установке для специалистов

Страница: 3 / 108

1 General safety precautions
Installer reference guide
3
EBLQ+EDLQ011~W1 + EK(2)CB
EKMB9W1
Daikin Altherma low temperature monobloc
4P522034-1 – 2018.01
7.8.9 To connect the electrical wiring on the control box ..... 45
7.8.10 To connect the control box power supply ................... 45
7.8.11 To connect the interconnection cable between
control box and outdoor unit ....................................... 45
7.8.12 To connect the electrical wiring on the option box ...... 45
7.8.13 To connect the option box power supply .................... 45
7.8.14 To connect the interconnection cable between option
box and control box..................................................... 46
7.8.15 To connect the electrical meters ................................. 46
7.8.16 To connect the alarm output ....................................... 46
7.8.17 To connect the space cooling/heating ON/OFF
output .......................................................................... 46
7.8.18 To connect the changeover to external heat source... 47
7.8.19 To connect the electrical wiring on the backup heater 47
7.8.20 To connect the backup heater power supply .............. 47
7.8.21 To connect the backup heater kit to the control box ... 48
7.8.22 To connect the valve kit .............................................. 49
7.9 Finishing the outdoor unit installation ........................................ 50
7.9.1 To close the outdoor unit ............................................ 50
7.10 Finishing the control box installation ......................................... 50
7.10.1 To close the control box.............................................. 50
7.11 Finishing the option box installation .......................................... 50
7.11.1 To close the option box............................................... 50
7.12 Finishing the backup heater installation .................................... 50
7.12.1 To close the backup heater......................................... 50
8 Configuration 50
8.1 Overview: Configuration ............................................................ 50
8.1.1 To connect the PC cable to the switch box................. 50
8.1.2 To access the most used commands ......................... 51
8.1.3 To copy the system settings from the first to the
second user interface.................................................. 51
8.1.4 To copy the language set from the first to the second
user interface .............................................................. 52
8.1.5 Quick wizard: Set the system layout after first power
ON............................................................................... 52
8.2 Basic configuration .................................................................... 52
8.2.1 Quick wizard: Language / time and date..................... 52
8.2.2 Quick wizard: Standard............................................... 52
8.2.3 Quick wizard: Options ................................................. 54
8.2.4 Quick wizard: Capacities (energy metering) ............... 56
8.2.5 Space heating/cooling control..................................... 57
8.2.6 Domestic hot water control ......................................... 61
8.2.7 Contact/helpdesk number ........................................... 61
8.3 Advanced configuration/optimization......................................... 61
8.3.1 Space heating/cooling operation: advanced ............... 61
8.3.2 Domestic hot water control: advanced........................ 65
8.3.3 Heat source settings ................................................... 70
8.3.4 System settings........................................................... 72
8.4 Menu structure: Overview user settings .................................... 75
8.5 Menu structure: Overview installer settings............................... 76
9 Commissioning 77
9.1 Overview: Commissioning ......................................................... 77
9.2 Precautions when commissioning ............................................. 77
9.3 Checklist before commissioning ................................................ 77
9.4 Checklist during commissioning ................................................ 77
9.4.1 To check the minimum flow rate ................................. 78
9.4.2 Air purge function........................................................ 78
9.4.3 To perform a test run .................................................. 79
9.4.4 To perform an actuator test run .................................. 79
9.4.5 Underfloor heating screed dryout................................ 79
10 Hand-over to the user 81
10.1 About locking and unlocking...................................................... 81
Possible function locks .............................................................. 81
To check if locking is active ....................................................... 81
To activate or deactivate a function lock ................................... 81
To activate or deactivate button lock......................................... 81
11 Maintenance and service 81
11.1 Overview: Maintenance and service .......................................... 81
11.2 Maintenance safety precautions................................................. 81
11.2.1 Opening the outdoor unit ............................................. 81
11.2.2 Opening the control box............................................... 81
11.2.3 Opening the option box................................................ 81
11.2.4 Opening the backup heater.......................................... 82
11.3 Checklist for yearly maintenance of the outdoor unit ................. 82
12 Troubleshooting 82
12.1 Overview: Troubleshooting......................................................... 82
12.2 Precautions when troubleshooting ............................................. 82
12.3 Solving problems based on symptoms....................................... 83
12.3.1 Symptom: The unit is NOT heating or cooling as
expected ...................................................................... 83
12.3.2 Symptom: The compressor does NOT start (space
heating or domestic water heating).............................. 83
12.3.3 Symptom: The pump is making noise (cavitation) ....... 83
12.3.4 Symptom: The pressure relief valve opens.................. 84
12.3.5 Symptom: The water pressure relief valve leaks ......... 84
12.3.6 Symptom: The space is NOT sufficiently heated at
low outdoor temperatures ............................................ 84
12.3.7 Symptom: The pressure at the tapping point is
temporarily unusually high ........................................... 84
12.3.8 Symptom: Decoration panels are pushed away due
to a swollen tank .......................................................... 84
12.3.9 Symptom: Tank disinfection function is NOT
completed correctly (AH-error)..................................... 84
12.3.10 Symptom: The energy metering (produced heat) is
NOT working correctly ................................................. 85
12.4 Solving problems based on error codes ..................................... 85
12.4.1 To display the help text in case of a malfunction ......... 85
12.4.2 Error codes: Overview ................................................. 85
13 Disposal 88
13.1 Overview: Disposal..................................................................... 88
13.2 To pump down............................................................................ 88
13.3 To start and stop forced cooling ................................................. 89
14 Technical data 90
14.1 Service space: Outdoor unit ....................................................... 90
14.2 Piping diagram: Outdoor unit...................................................... 91
14.3 Wiring diagram: Outdoor unit ..................................................... 91
14.4 Valve kit necessity ...................................................................... 96
14.5 ESP curve: Outdoor unit............................................................. 97
15 Glossary 98
16 Field settings table 99
1 General safety precautions
1.1 About the documentation
▪ The original documentation is written in English. All other
languages are translations.
▪ The precautions described in this document cover very important
topics, follow them carefully.
▪ The installation of the system, and all activities described in the
installation manual and the installer reference guide MUST be
performed by an authorised installer.
1.1.1 Meaning of warnings and symbols
DANGER
Indicates a situation that results in death or serious injury.
DANGER: RISK OF ELECTROCUTION
Indicates a situation that could result in electrocution.