Daikin Altherma 3 WS EWSAH06UD Series Скачать руководство пользователя страница 3

2 Specific installer safety instructions

Installation manual

3

EWSAH/X06UD
Daikin Altherma 3 WS
4P675760-1C – 2023.02

General safety precautions:

▪ Safety instructions that you must read before installing

▪ Format: Paper (in the box of the unit)

Operation manual:

▪ Quick guide for basic usage

▪ Format: Paper (in the box of the unit)

User reference guide:

▪ Detailed  step-by-step  instructions  and  background  information

for basic and advanced usage

▪ Format:  Digital  files  on 

https://www.daikin.eu

.  Use  the  search

function   to find your model.

Installation manual:

▪ Installation instructions

▪ Format: Paper (in the box of the unit)

Installer reference guide:

▪ Preparation  of  the  installation,  good  practices,  reference

data, …

▪ Format:  Digital  files  on 

https://www.daikin.eu

.  Use  the  search

function   to find your model.

Addendum book for optional equipment:

▪ Additional info about how to install optional equipment

▪ Format:  Paper  (in  the  box  of  the  unit)  +  Digital  files  on 

https://

www.daikin.eu

. Use the search function   to find your model.

Latest revisions of the supplied documentation may be available on
the regional Daikin website or via your dealer.

The original documentation is written in English. All other languages
are translations.

Technical engineering data

▪ A 

subset

  of  the  latest  technical  data  is  available  on  the  regional

Daikin website (publicly accessible).

▪ The 

full  set

  of  latest  technical  data  is  available  on  the  Daikin

Business Portal (authentication required).

Online tools

In addition to the documentation set, some online tools are available
for installers:

Heating Solutions Navigator

▪ Digital  toolbox  that  offers  a  variety  of  tools  to  facilitate  the

installation and configuration of heating systems.

▪ To  access  Heating  Solutions  Navigator,  registration  to  the

Stand  By  Me  platform  is  required.  For  more  information,  see

https://professional.standbyme.daikin.eu

.

Daikin e-Care

▪ Mobile app for installers and service technicians that allows you

to register, configure and troubleshoot heating systems.

▪ The  mobile  app  can  be  downloaded  for  iOS  and  Android

devices  using  the  QR  codes  below.  Registration  to  the  Stand
By Me platform is required to access the app.

App Store

Google Play

Engineering guide for collective housing

▪ Digital  engineering  toolbox  which  provides  guidelines  to  define

the  central  water  loop  technical  specifications.  For  more
information 

see 

Engineering 

guide

 

at 

https://

collectivehousing.daikin.eu

.

2

Specific installer safety
instructions

Always observe the following safety instructions and regulations.

Installation site (see 

"4.1 Preparing the installation site"

 [

4

 6])

WARNING

Follow  the  service  space  dimensions  in  this  manual  for
correct  installation  of  the  unit.  See 

"4.1.1  Installation  site

requirements of the indoor unit"

 [

4

 6].

WARNING

The  appliance  shall  be  stored  in  a  room  without
continuously  operating  ignition  sources  (example:  open
flames, an operating gas appliance or an operating electric
heater).

Special requirements for R32 (see 

"Special requirements for

R32"

 [

4

 6])

WARNING

▪ Do NOT pierce or burn refrigerant cycle parts.

▪ Be  aware  that  the  refrigerant  inside  the  system  is

odourless.

WARNING

Make  sure  installation,  servicing,  maintenance  and  repair
comply  with  instructions  from  Daikin  and  with  applicable
legislation and are executed ONLY by authorised persons.

Opening and closing the unit (see 

"4.2 Opening and closing the

unit"

 [

4

 6])

DANGER: RISK OF ELECTROCUTION

Do NOT leave the unit unattended when the service cover
is removed.

DANGER: RISK OF BURNING/SCALDING

CAUTION

The hydro module is heavy. It requires at least two persons
to carry it.

Mounting the indoor unit (see 

"4.3 Mounting the indoor

unit"

 [

4

 9])

WARNING

Fixing  method  of  the  indoor  unit  MUST  be  in  accordance
with  the  instructions  from  this  manual.  See 

"4.3  Mounting

the indoor unit"

 [

4

 9].

Piping installation (see 

"5 Piping installation"

 [

4

 10])

WARNING

The  field  piping  method  MUST  be  in  accordance  with  the
instructions 

from 

this 

manual. 

See 

"5 

Piping

installation"

 [

4

 10].

DANGER: RISK OF BURNING/SCALDING

Содержание Altherma 3 WS EWSAH06UD Series





















































Отзывы: