4
|
Operation
User reference guide
33
ETVH/9W(G) + ETBH/9W
Daikin Altherma 3 H HT F+W
4P586456-1 – 2019.07
a2
Heat emitter of the additional zone (in this example
Radiator
). If no icon is
displayed, there is no additional zone.
b
Room thermostat type of the main zone:
If b=…
Then the temperature control is…
Main zone
Additional zone (if any)
Room thermostat control External room thermostat
control
External room thermostat
control
No icon
Leaving water
temperature control
Leaving water
temperature control
4.6.4 To change the desired room temperature
During room temperature control, you can use the room temperature setpoint
screen to read out and adjust the desired room temperature.
1
Go to [1]:
Room
.
Room
1
2
Adjust the desired room temperature.
+
–
21
°C
1
a
b
Room
a
Actual room temperature
b
Desired room temperature
If scheduling is on after changing the desired room temperature
▪
The temperature will stay the same as long as there is no scheduled action.
▪
The desired room temperature will return to its scheduled value whenever a
scheduled action occurs.
You can avoid scheduled behaviour by (temporarily) turning off scheduling.
To turn off room temperature scheduling
1
Go to [1.1]:
Room
>
Schedule
.
2
Select
No
.
4.6.5 To change the desired leaving water temperature
INFORMATION
The leaving water is the water that is sent to the heat emitters. The desired leaving
water temperature is set by your installer in accordance with the heat emitter type.
Only adjust the leaving water temperature settings in case of problems.