Daikin Altherma 3 GEO EGSAH06DA9W, Руководство по эксплуатации

Страница: 5 / 16

3 Operation
Operation manual
5
EGSAH/X06+10DA9W(G)
Daikin Altherma 3 GEO
4P569812-1 – 2019.02
Item Description
j Malfunction
A malfunction occurred.
See "6.1 To display the help text in case of a
malfunction" on page 11 for more information.
(1) If the corresponding operation (for example: space heating)
is not active, the circle is greyed out.
3.2.2 Main menu screen
In the home screen, press to open the main menu screen.
From the main menu, you can access the different setpoint screens
and submenus.
Possible actions on this screen
Go through the list.
Enter the submenu.
Enable/disable breadcrumbs.
Item Description
or
Malfunctioning
Restriction: Only displayed if a malfunction
occurs.
See "6.1 To display the help text in case of
a malfunction" on page 11 for more
information.
Room
Restriction: Only displayed if a dedicated
Human Comfort Interface (BRC1HHDA
used as room thermostat) is controlling the
indoor unit.
Set the room temperature.
Main zone
Shows the applicable symbol for your main
zone emitter type.
Set the leaving water temperature for the
main zone.
Additional zone
Restriction: Only displayed if there are two
leaving water temperature zones. Shows
the applicable symbol for your additional
zone emitter type.
Set the leaving water temperature for the
additional zone.
Space heating/
cooling
Restriction: Only for heating/cooling
models.
Shows the applicable symbol of your unit.
Put the unit in heating mode or cooling
mode.
Tank
Set the domestic hot water tank
temperature.
User settings
Gives access to user settings such as
holiday mode and quiet mode.
Information
Displays data and information about the
indoor unit.
Installer
settings
Restriction: Only for the installer.
Gives access to advanced settings.
Commissioning
Restriction: Only for the installer.
Perform tests and maintenance.
User profile
Change the active user profile.
Item Description
Operation
Turn heating/cooling functionality and
domestic hot water preparation on or off.
3.2.3 Setpoint screen
The setpoint screen is displayed for screens describing system
components that need a setpoint value.
Example:
▪ Room temperature screen
▪ Main zone screen
▪ Additional zone screen
▪ Tank temperature screen
a1
d
+
–
d
e
d
e
c
a2
b1
b2
Possible actions on this screen
Go through the list of the submenu.
Go to the submenu.
Adjust and automatically apply the desired
temperature.
Item Description
Minimum temperature limit a1 Fixed by the unit
a2 Restricted by the installer
Maximum temperature limit b1 Fixed by the unit
b2 Restricted by the installer
Current temperature c Measured by the unit
Desired temperature d Turn the right dial to
increase/decrease.
Submenu e Turn or press the left dial to
go to the submenu.
3.2.4 Detailed screen with values
a b
a Settings
b Values
Possible actions on this screen
Go through the list of settings.
Change the value.
Go to the next setting.
Confirm changes and proceed.
3.3 Space heating/cooling control
3.3.1 Setting the space operation mode
To set the space operation mode
1 Go to [4.1]:
Space heating/cooling
>
Operation
mode