Daikin ACEF 3AVE, Руководство по обслуживанию

Страница: 19 / 58

Operation of The Unit SiE00-06
12 Field Setting
Explanation
A To turn the lamps ON/OFF
Pressing turns the inverter lamp ON and OFF. Turn the lamp OFF if light from the front panel is
disturbing, for example at night. If left OFF, deodorizing and antiviral performance is reduced.
B To set fan speed manually
Every time is pressed, fan speed changes as follows.
The fan starts at the last set fan speed.
When “Quiet” is selected, the fan turns slowly enough not to disturb people in their sleep.
C To remove pollen
Press once to remove pollen from room air effectively. The unit will repeatedly switch between 5
minutes at normal speed and 5 minutes at low speed.
Press again to turn the pollen mode OFF.
D To set the OFF timer
Every time is pressed, the OFF timer setting changes as follows.
When the set time elapses, the unit shuts OFF automatically. The setting can be changed at any time even
while the unit is running.
E To start/stop the unit
The first time is pressed, the unit starts up. The next time, it turns OFF.
F To set fan speed automatically
Press . Fan speed is selected automatically - Quiet Low,
Normal, High - depending on air quality.
G To remove cigarette odors and smoke effectively
Press once to remove cigarette odors and smoke from room air repidly. The unit will run for 5
minutes at high speed followed by 15 minutes at normal speed, and will then switch to auto fan speed
control.
Press again to turn OFF the cigarette smoke mode.
H To turn OFF air quality lamps
Turn the air cleaner OFF before pressing this button when you want to turn OFF the lamps.
To operate the unit from the front panel
The unit can be operated from the front panel instead of the remote control. Pressing the selects
operating mode and turns the unit OFF. See page 5.
If the unit malfunctions
If, during electrical storms or because of radio communications, the front panel lamps light irregularly, if the
unit cannot be operated from the remote controller or if some other problem occurs, unplug the power
cabel for a moment, then plug it back in and restart the unit.