25
Screen
Button
Action
Set standby function
On the “PM and Filter Pressure Drop”, press
(5)
Return to
move the “Room Decontamination screens”. Press and hold
for 5 secs
(3)
Enter button, the field will start blinking use
the
(4)
Up or
(6)
Down buttons to select the number desired
and
(3)
Enter button to move on the field until the Standby
field. When set to “Yes” after 5 seconds without operational
contact the display will go into standby Startup/Logo screen.
Set PM indication function
On the “PM and Filter Pressure Drop”, press
(5)
Return to
move the “Room Decontamination screens”. Press and hold
for 5 secs
(3)
Enter button, the field will start blinking use the
(4)
Up or
(6)
Down buttons to select the number desired and
(3)
Enter button to move on the field until the PM indication
field. When set to “Yes”, the PM level will appear on the main
screen. When set to “No”, the filter pressure drop will appear
on the main screen.
Set PM Alert function
On the “PM and Filter Pressure Drop”, press
(5)
Return to
move the “Room Decontamination screens”. Press and hold
for 5 secs (
3)
Enter button, the field will start blinking use the
(4)
Up or
(6)
Down buttons to select the number desired and
(3)
Enter button to move on the field until the PM Alert field.
When set to “Yes”, the PM alert information will appear on
the main screen.
Note:
The alert will only appear if the particle concentration
exceeds 35 ug/m³. This threshold is considered unhealthy
for individuals with sensitivities, as stated by the U.S.
Environmental Protection Agency (EPA).
U.S. EPA Categories
Values PM2.5 μg/m
3
Good
0.0 - 12.0
Moderate
12.1 - 35.4
Unhealthy Sensitivities
35.5 - 55.4
Unhealthy
55.5 - 150.4
Very Unlealthy
150.5 - 250.4
Hazardus
250.5 - 350.4
CONTROL PANEL (CONT’D)
OPERATIONS MODE – FUNCTIONALITY
