Installation Manual
Wireless LAN Connecting Adapter
<BRP069A41>
4P359542-1E
Safety precautions
Safety precautions
Prohibited
Follow directions.
◆
The following describes the meanings of pictorial symbols used in this documentation.
◆
To conduct a test run of the air conditioner, complete according to the installation
manual for the air conditioner unit.
Accessories
Accessories
Situations which could result in
damage or physical injury.
Caution
URL:
Homepage:
◆
For details on specifications, setting methods, FAQ
and declaration of conformity:
see our homepage.
Give this installation manual to the customer when installation is completed.
English
Situations which could result
in death or serious injury.
Warning
When installing:
■
Request installation by your dealer or a technician.
(Can cause electric shock or fire.)
■
Always use the accessories and specified parts for installa-
tion. Be sure to follow the directions in this installation
manual.
(Can cause the unit to fall, electric shock or fire.)
■
Electrical work must be implemented according to "Technical
standards for electrical equipment," "Indoor wiring regula-
tions", and this installation manual. Always use a dedicated
circuit.
(Can cause electric shock or fire.)
■
Always turn off the power supply when installing.
(Touching the electrical parts can cause an electric shock.)
When using:
■
Do not disassemble, modify, or repair.
(Can cause fire, electric shock or injury.)
■
Do not handle this product with wet hands.
(Can cause electric shock or fire.)
■
Do not allow this product to get wet or use it when bathing or
similar activities using water.
(Can cause electric shock or fire.)
■
Do not use this product near medical equipment or persons
using cardiac pacemakers or defibrillators. This product may
cause life-threatening electromagnetic interference.
■
Do not use this product near auto-control equipment such as
automatic doors or fire alarm equipment.
(Can cause accidents due to erroneous equipment behavior.)
■
Immediately disconnect the air conditioner power plug if
there is abnormal odor or sound, when it is overheating,
or smoking.
(Can cause fire or malfunction.)
◆
Request an inspection by your dealer.
■
Disconnect the air conditioner power plug if the product was
dropped or the case is damaged.
(Can cause fire or electric shock.)
◆
Request an inspection by your dealer.
When installing:
■
Do not install where flammable gas leaks can occur.
(Can cause fire.)
■
Grip the connector when disconnecting the connecting cord
from the outlet.
(Otherwise fire or electric shock can occur.)
When using:
■
Do not use where small children can get access.
(Can cause injuries.)
■
Do not use this product near a microwave oven.
(This can affect Wireless LAN communications.)
Check if the following accessories are included in your package.
◆
Affix to the seal attachment on the back face of this sheet and store in a safe place.
※
1
(A) Wireless LAN
connecting adapter
1 pc
1 sheet
(B) Serial number seal (C) Installation manual
※
1
Model
BRP069A41
●
●
●
http://www.onlinecontroller.daikineurope.com
Main components
Main components
Installation
Installation
BRP069A41
Installation
Work
Wireless LAN connecting adapter
POWER lamp (green)
lights when running.
RUN lamp (orange)
lights when connecting
to a router (Wireless
LAN access point).
AP lamp (yellow)
lights when connected
directly to a smart phone.
SETUP button
Use when
connecting to a
router (Wireless
LAN access point).
MODE button
switches modes
(RUN/AP) when
held down.
Wireless LAN
connection
adapter
(the product
is inside the
indoor unit)
■
BRP069A41
Attach the connecting cord connector (white).
◆
Fasten the connecting cord to the notch in the adapter case (lower).
Attach connecting cord to the product.
3
Fasten the connecting cord and ensure
that external force is not transmitted.
Connect the connector to the same color.
Connector (white)
Press a regular screwdriver into the dent between the upper and lower
cases to remove. (Be careful not to damage the case.)
Remove the adapter case (upper).
2
Regular screwdriver
Adapter
case (upper)
Adapter
case (lower)
Wireless LAN
connecting adapter
printed circuit board
■
BRP069A41
Attach the Wireless LAN connection adapter
to indoor unit.
1
■
BRP069A41
Remove the upper front panel from the indoor unit and open the door,
grab the connecting cord with your fingers and pull it out, then remove
the tie-wrap and pull the insulation tube off the connecting cord.
◆
Refer to your air conditioner's installation manual for details on
removing the upper front panel.
Always turn off the power supply when installing.
(Touching the electrical parts can cause
an electric shock.)
Danger
Open the door
Grab the
connecting cord
Tie wrap
Insulation tube
Connector
(white)
