Sound Blankets
Si121293EC
18
Removal Procedure
6. Sound Blankets
Warning
Be sure to wait for 10 minutes or more after turning off all power supplies before
disassembling work.
Step
Procedure
Points
1
2
Pull out the clamp of the
compressor harness
from the partition plate.
Remove the 4 screws,
and then the partition
plate.
When reassembling, fit the
hook on the partition plate to
the notch of the outdoor heat
exchanger plate.
3
4
Remove the sound
blanket (outer top).
Remove the sound
blanket (outer).
Since the piping ports on the
sound blankets are torn
easily, remove the blankets
carefully.
5
6
Remove the sound
blanket (inner top).
Remove the sound
blanket (inner).
(R20771)
Partition plate
Clamp
Partition
plate
Hook
(R17999)
(R18261)
Sound blanket
(outer top)
Sound blanket
(outer)
(R22551)
(R22552)
Sound blanket
(inner)
Sound blanket
(inner top)