manualshive.com logo in svg

Daikin 4MWXM-A, Руководство по установке для специалистов

Поделиться
Скачать
Daikin 4MWXM-A Скачать руководство пользователя страница 24

6

 | 

Unit installation

Installer reference guide

24

4MWXM-A

R32 Split series

4P678385-1A – 2022.02

6 Unit installation

WARNING

Installation shall be done by an installer, the choice of materials and installation shall
comply with the applicable legislation. In Europe, EN378 is the applicable standard.

In this chapter

6.1

Preparing the installation site ................................................................................................................................................

24

6.1.1

Installation site requirements of the outdoor unit ...............................................................................................

25

6.1.2

Additional installation site requirements of the outdoor unit in cold climates ...................................................

27

6.2

Opening the unit.....................................................................................................................................................................

28

6.2.1

About opening the unit ..........................................................................................................................................

28

6.2.2

To open the outdoor unit ......................................................................................................................................

28

6.3

Mounting the outdoor unit ....................................................................................................................................................

29

6.3.1

About mounting the outdoor unit .........................................................................................................................

29

6.3.2

Precautions when mounting the outdoor unit......................................................................................................

29

6.3.3

To provide the installation structure .....................................................................................................................

29

6.3.4

To install the outdoor unit .....................................................................................................................................

30

6.3.5

To provide drainage ...............................................................................................................................................

30

6.3.6

To prevent the outdoor unit from falling over ......................................................................................................

31

6.1 Preparing the installation site

Choose an installation location with sufficient space for carrying the unit in and out
of the site.

Do NOT install the unit in places often used as work place. In case of construction
works  (e.g.  grinding  works)  where  a  lot  of  dust  is  created,  the  unit  MUST  be
covered.

CAUTION

▪

Check if the installation location can support the unit's weight. Poor installation is
hazardous. It can also cause vibrations or unusual operating noise.

▪

Provide sufficient service space.

▪

Do NOT install the unit so that it is in contact with a ceiling or a wall, as this may
cause vibrations.

▪

Choose a location where the operation noise or the hot/cold air discharged from
the unit will not disturb anyone.

▪

Provide sufficient space around the unit for servicing and air circulation.

▪

Avoid areas where flammable gas or product might leak.

▪

Install  units,  power  cables  and  communication  wiring  at  least  3  m  away  from
televisions  or  radios  to  prevent  interference.  Depending  on  the  radio  waves,  a
distance of 3 m may not be sufficient.

NOTICE

Do  NOT  place  objects  below  the  indoor  and/or  outdoor  unit  that  may  get  wet.
Otherwise  condensation  on  the  unit  or  refrigerant  pipes,  air  filter  dirt  or  drain
blockage may cause dripping, and objects under the unit may get dirty or damaged.

Содержание 4MWXM-A

















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды