Daihen OTC Welbee WB-M350, Руководство пользователя

Страница: 15 / 144

1-7
Chapter 1 Safety Information
S
AFETY
P
RECAUTION
S
AFETY
I
NFORMATION
C
HAPTER
1
1.2.7 Precautions for disassembling and modifying the welding power
source
To prevent electrical shock, fire, injury from malfunction and error in the welding power source, ensure
to follow the precautions below:
1.2.8 Precaution for protective equipment
For protection from arc ray generated from welding, spattering dross and hearing disorder from noise,
observe the following:
1.2.9 Precautions for rotating part
To prevent being caught/pinched by the rotating parts, ensure to follow the instructions below:
• Do not disassemble/modify the welding power source.
Disassembling/modifying by customer is out of the warranty scope.
• When welding or watching a welder work, wear face shield with a proper shade of filter
(See ANSI Z 49.1 listed in PRINCIPAL SAFETY STANDARDS) to protect the face and
eyes.
• Wear safety goggles in the work area and the surrounding.
Ignoring the above may cause injury in the eye or burn from spatter and spattering
dross.
• Wear protective equipment such as protective leather gloves, long-sleeve clothes, leg
covers, and leather apron.
Ignoring the above may cause electrical shock and burn.
• Install protective screens or barriers to protect the eyes of others in the work area from
arc ray.
• Wear an ear protector when noise level is high.
Ignoring the above may cause hearing disorder.
• Keep your hands, fingers, hairs and clothes away from the rotating cooling fan, open
parts around the cooling fan and feed roll of the wire feeder.