Daihen OTC Welbee Inverter W400, Руководство пользователя

Страница: 24 / 158

P
RODUCT
C
ONFIGURATION
P
RODUCT
S
PECIFICATION AND
C
ONFIGURATION
C
HAPTER
2
2-8
• At DC STICK welding:
2.2.1.1 Wire feeder and welding torch
Wire feeder and welding torch are provided as standard component of the welding power source. Refer
to the instruction manuals for details.
2.2.2 Accessory (not supplied)
This section explains the accessories to be prepared by the customer before operating the welding power
source.
Prepare the following:
• Shielding gas
Use a shielding gas suitable to the welding method.
No. Name
Supplied unit
(*1)
Optional
accessories
Remarks
1 Welding electrode holder
To be prepared by the customer.
(
2.2.2
-
Accessory (not
supplied))
2 Power cable (38mm
2
-
or more) ○ (*2)
3 Power cable for base metal side (2 m) ○ (*2)
4 Digital remote control (optional)
○
(*2)
5 Analog remote control (3 m) (optional)
○
(*2)
*1: Standard component with welding power source. (Supplied when placing order for the welding power source)
*2: Optional extension cable and hose (5 m/10 m/15 m/20 m) are also available. (
2.2.3
-
Optional accessories)
Name Remarks
MAG gas
Argon (Ar) 80 % + Carbon dioxide (CO
2
) 20 %
Argon (Ar) 90 % + Carbon dioxide (CO
2
) 10 %
MIG gas
Argon(Ar)97.5 % + Carbon oxygen (CO
2
) 2.5 %
MIG gas (stainless)
Argon(Ar) 98 % + Oxygen (O
2
) 2 %
MIG gas (aluminum)/
aluminum-bronze/
/Silicon-bronze)
Argon (Ar) 100 %
4
5
2
3
1
Welding power source
Base metal