－
8
－
3.2 INSTALTION AND CONNECTION
1) Push the cooler inside the welding source
along the rails.
2) Leave gap between 20-25 cm.
3) Connect the flow sensor connector (6-pole) to
the right connector in the welding source.
4) Connect the power connector (9-pole) to the
left connector in the welding source.
5) Push the cooler all the way into the welding
source. Screws: M4x12 (T20)
– 4 pcs (code:
632079)
6) Screws on the back side M5x12
– 2 pcs (code:
630100).
20-25cm
